OldMiniBikes.com Forum - View Single Post

speedbob · 07-08-2008, 02:06 AM

Thanks for all the info.The chain was really tight.It helped a bit.
We put a tec 3.5 and a max torque clutch on the other already..wow 35mph easy..Thats not much power diff but it runs like it should.Something must be wrong.
The choke is not on.
I don't know how to adjust the speed control screw Jim..Could you tell me where that is at and what it looks like?
If i change the clutch will that really help or will i be spending money for not much gain?
Here would i get a undrilled gear at?Can i just get one with holes drilled and just make new ones ?
Also i don't think i should remove the govenor with a 10 and 13yo ridding..That's probably not safe is it?
Also one of the boys weigh in at around 120# and the other at 80# if that helps.

07-08-2008, 02:06 AM	#10 (permalink)
speedbob Member Join Date: Jun 2008 Posts: 58 iTrader: (0) View My Photos	Thanks for all the info.The chain was really tight.It helped a bit. We put a tec 3.5 and a max torque clutch on the other already..wow 35mph easy..Thats not much power diff but it runs like it should.Something must be wrong. The choke is not on. I don't know how to adjust the speed control screw Jim..Could you tell me where that is at and what it looks like? If i change the clutch will that really help or will i be spending money for not much gain? Here would i get a undrilled gear at?Can i just get one with holes drilled and just make new ones ? Also i don't think i should remove the govenor with a 10 and 13yo ridding..That's probably not safe is it? Also one of the boys weigh in at around 120# and the other at 80# if that helps.