OldMiniBikes.com Forum - View Single Post

4-banger · 10-07-2008, 11:02 PM

Here is the newest bike I built. I based it on some plans a friend had from the 50's of a homemade board track racer. I used a modified bmx bike frame and a 3hp B&S motor. Before anyone says anything I know the welds look like crap, but the welder was a new one and it turned out to be defective, but the welds do have good penetration and are strong. Just not pretty.

Motor Mayhem Blog Archive BMX Cycle

Let me know what you think.

10-07-2008, 11:02 PM	#1 (permalink)
4-banger Junior Member Join Date: Oct 2008 Posts: 9 iTrader: (0) View My Photos	My Newest Bike Here is the newest bike I built. I based it on some plans a friend had from the 50's of a homemade board track racer. I used a modified bmx bike frame and a 3hp B&S motor. Before anyone says anything I know the welds look like crap, but the welder was a new one and it turned out to be defective, but the welds do have good penetration and are strong. Just not pretty. Motor Mayhem Blog Archive BMX Cycle Let me know what you think.