Springs, Jackshaft clutch & friction brake!!!!!

[Owler10]

Working on my Sears mini. I have a few questions.
1 - My front springs are both broken. Does anyone know where we can get springs with an ID of 1.25" about 3.5 - 4" long?
2 - My Jackshaft clutch has no teeth. Does anyone know where to get one? A friend of my dad's brought one over, but it was too big round, and it has the teeth on the drum. Mine has the teeth on the clutch side. Any ideas. I may just use a small sprocket, but it would be nice to get the 2-speed working.
3 - What went on the pedal for the brake that rubbed the rear tire. I have the pedal part but there is nothing by the tire. Anyone have any pictures.

Thanks
Ben

[Bonanza Bryan]

Pm Scooterboy he can make you some springs. As far as the 2 speed jackshaft you might want to get a new one. Baddog sells them often on ebay. Theres one for sale now item #370329014929 or you can try to contact him and see if he will sell just the part you need. As far as the brake there should be a metal plate welded on the bar that rubs against the tire.

[ScooterBoy]

Originally Posted by Bonanza Bryan

Pm Scooterboy he can make you some springs.

Scooterboy can get springs made. Not cheap if you only need 2.

[wayne]

mark i will call you tomoro,canyou tell me a good time ? i think thers 3 Hr
between your and my time,thanks wayne.

[george3]

The brake is a aluniumn triangle block that bolts to it. scooterboy was going to make them, dont know if he ever did. Baddog is way over priced on everything he sells.

[alwhite00]

Try McMaster Carr or Grainger for the springs, They have a lot of that kind of thing.

LK

[Family Dad]

I found the springs I need for my fox doodlebug at the local farm store. Try that or a hardware store.