I put in my new points and condenser last night and I am still not getting any spark. I still have juice at the plug wire but no spark coming from the plug. The plug is new so I know it is not that. Do I just need to set my points on my engine? I have never set the points on a small engine so I am kind of lost. I just moved my condencer up untill there was a small gap between the points and the condencer. Any tips or help would be appreciated! Thanks
I just read somewhere else that the gap for the magneto needs to be arounf .10 and the points need to be set for .20. Does that sound right? at what point do you check your points? Do I turn the flywheel until that plunger is all of the way down and then set the point gap? Thanks again
I just read somewhere else that the gap for the magneto needs to be arounf .10 and the points need to be set for .20. Does that sound right? at what point do you check your points? Do I turn the flywheel until that plunger is all of the way down and then set the point gap? Thanks again
Last edited: