Search results

You are correct. I don't have the drive shaft. However I am including everything you need to build your own. All that is needed is an old socket that fits your crankshaft nut. A 3/8" drive socket will work perfectly as the Dremel flex shaft collar sits perfectly centered in the square 3/8"...

https://www.ebay.com/itm/325222931008

Here are a couple of pics! Hec

Update: Well 6 years have gone by and now my youngest is way too big to ride in the side car. Actually she out grew it about 3 years ago and now drives the mini bike with and without the side car. So I pulled out the seat from the side car and put a dog bed in it. My daughters now gives our...

I have this Tecumseh Drawing for now. https://www.partstree.com/models/54-9822-toro-light-kit/headlamp-assembly-0/ I don't have items 7 or 14. I will take pics of everything an post them tonight. Hec

I have NOS Tecumseh Pull Start Cover Alternator for sale. I have a headlight, wiring, and the alternator. The alternator works perfectly and lights up the light using a drill to spin the alternator. I also have square flex cable to make the flex drive shaft. I don't have the flexible drive...

Howdy All, I recently acquired a Tecumseh Recoil Generator. However, I need the drive nut that fits on the crankshaft nut to drive the generator. Anyone out there have one they want to sell? Here is what it looks like. Thanks in advance! Hec

Canuk, I have the Tecumseh Add on Generator but need the drive nut with square shaft. Do you have one you would like to spare? thanks Hec

Cool!

All, SUCCESS! The brakes work better than ever! My 10 year old daughter can now stop it within a very reasonable distance and still be able to squeeze the brake lever. If I adjust the brake cable tighter it stops even better but then my 10 yr old daughter can't squeeze the brake lever. I...

I worked on the brakes this week and did the following: Cut the 45 degree slices into the bottom brake shoe. Removed the electro plating from the brake drum. Welded the old steel backing plate to the new backing plate. This gave me the clearance I needed and allowed the brake shoes to be...

FOMOGO, I should of been more clear, I am thinking of making the actuating lever on the brake assembly longer not the actual brake lever on the handle bar longer. I hope this makes sense. Hec

Thanks everyone for your suggestions and comments! Mariah, I will definitely try your suggestions! This weekend I removed the rear wheel and did some inspecting of the brakes. I had used an 1-5/8" spacer between the bearing and steel backing plate. I needed this spacer to bring the steel...

Howdy all, Long time no post. I have a question for those with experience regarding Azuza 4.5" drum brakes. Which way do you install the brake actuator lever? Do you install it so that it rotates counter-clockwise or clockwise? For Counterclockwise rotation the curved actuator lever would...

All, It's Done! I got it done the Friday night before my 7 yr olds bday party! It was a big hit on her Bday too! I must of put 100 miles on it giving kids rides. We get a lot of thumbs up from the neighbors as we take rides around the lake. It took a while to build but hey, I'm slow. We...

Thanks everyone! I got a little more work done on the project in the past couple of days. I installed the engine, brake and throttle controls, Kill switch, and center stand. Put some gas in it over lunch and took a spin. Received a lot of crap from the guys here at the office due the color...

Here are some pics from yesterday's assembly progress! Still have a little work ahead of me. Getting real close now! Enjoy! Hec

Here are the parts back from powder coating. I am still waiting on the side car body, fuel tank, side car seat frame, and side car support frame. They are supposed to be done by Friday. I hope so! All in all looks pretty good! Hec

All, Got all the parts needed to add lighting to my OHH60. Parts used: * Tecumseh 611113 Stator * Tecumseh Air Baffle Left 36621 & Right 37709 to replace original backing plate * Tecumseh OHH60 Flywheel with 3 magnets. I removed the ring gear on it. Thanks Bike Buddy for the...

All, Got all the parts needed to add lighting to my OHH60. Parts used: * Tecumseh 611113 Stator * Tecumseh Air Baffle Left 36621 & Right 37709 to replace original backing plate * Tecumseh OHH60 Flywheel with 3 magnets. I removed the ring gear on it. Thanks Bike Buddy for the removal...