three wheel cushman truck - Page 2

grandpa ray · 09-13-2008, 01:17 PM

hey there i bought a 1989 -3 wheel cushman for 125.00 about 3 years ago and i use it almost every day for my yard & lawn work . they are a lot of fun to beat around with and cheap on fuel .if you can get a good one for under $1000.00 i would go for it.

**randyk72@verizon** · 09-13-2008, 01:22 PM

You stole that! $125.00 wow

grandpa ray · 10-07-2008, 01:36 PM

hey neck ' question 4 u. i have a 1989 -3 wheel haulster with a omc 22 hp motor . when i am out & about it runs good for a while then it starts to flood out and smoke and it dies on me .any suggestions would be appreciated .i am thinking it might be the breather or maybe to much oil in the crankcase . just guessing ?????? thanks in advance . GRANDPA RAY

65ShelbyClone · 10-18-2008, 11:22 PM

I have a mid '60s three-wheeled Truckster with a 12hp Kohler K301 flathead and an all-iron three speed trans. My old man has a late '70s/early '80s Truckster of similar style, except is has the aluminum transmission and a hydraulic dump bed.

They are simple and quite easy to work on, but the brake and electrical systems are weak points.

eengholm · 10-29-2008, 03:34 PM

Hello all, first time to forum and posting. I just purchased a 1979 3-wheel cushman truck and I am wondering where a good resource would be to get or find parts? The truck runs fine, what are the chances of finding replacement doors? Thanks everyone.

-Erik

grandpa ray · 11-02-2008, 12:05 AM

hey eric i have a parts manual for trucksters and i think i got parts from cushman motor co .inc at 2909 e franklin ave in minneapolis phone number is 612-333-3487 check with them and see if they are still in business .get back to me and let me know what you find as i may need some parts soon: