18cc

  1. trinik7597

    Honda 18cc built head

    This is a quick power upgrade to either hondagx200/hemi or predator .. one of my own personal race heads . Real Honda zh8 casting with 27/25 stainless valves 26# springs , aluminum locks and retainers , real Honda rockers and guide plate ,and port work already done .. bolt on power $125 shipped
  2. ole4

    New 18cc clone head.

    I saw this on Bobs it is a copy of the old Honda head and Mike from cloneenginepartsonline.com has them for sale. While I still like the hemi it lacks a squish area unless welded which causes other issues. This head has two squish areas and a sort of fast burn design with tapered walls. This...
  3. DBMonster85

    18cc honda head or 14cc clone head

    Ok guys I've built my drag bike with a 14cc clone head on it with 27mm intake and 24mm out. today I picked up a Honda 18cc head with 28mm intake and 25 out. what head would perform better and or give me the most power. this is a race bike only no joy riding. heres what else is in the motor. I...
  4. S

    looking for a genuine honda gx160 18cc head

    Like stated looking for a real honda 18cc head
  5. M

    18cc honda head on predator

    So I'm wondering a few things I have a 18cc Honda head milled .65 ..p&p I'm running a 22mm carb black mamba cam wat would be the best valve size combo ? And I'm running 1.3 stamped rockers 26lb springs iv seen a lot about the champion rockers are they better or just easyer to set the valve lash...
  6. Dodgeboydan

    18cc head stock?

    Just finished the tear down of my gx200 clone. I decided to see what the stock chamber volume was. After checking my results twice, I confirmed that it measures 18 cc. I thought maybe I had a gx160 clone, but I checked the bore and stroke, and it's deffinately a gx200. This engine appears to be...
  7. iatemeself

    14cc 18cc or 22cc head what is this?

    what is this? I have a spare engine laying around I think its a 5.5hp so it should be a 14cc head from a gx160... Was wondering as well if the stud kit from the predator would work on this cylinder head because the valve studs were stripped on this cylinder head... I'm going to slap...
  8. Hondagx160DB

    14cc or 18cc head?

    I am looking into a new head and valvetrain parts. I have a modified clone with these mods: Billet fw and rod 18lb springs 22mm mikuni split retainers and keepers flat top piston header .265 cam I am looking for more power. which head would work best? this is the first build that i am...
  9. jimmyp

    NR 18cc honda head

    NR 18cc OEM honda head, dual 55# springs w/Aluminum retainers and Split Keepers, stainless valves 27mm intake and 24mm exhaust, milled .065, 4 angle valve job. head is used but not very much. $150 shipped $140 picked up paypal +4% OBO
  10. blkscorpion80

    GX160 Head

    Honda GX160 Parts 1. GX160 head- $45 shipped. It will come complete with the springs, rockers and the push rods. This head is on a running engine. 2. Block- $35 shipped (I have 2 blocks) 3. Cam and rod $15 shipped (2sets) Gx160 clone parts 4. Clone head $10 shipped 5. Clone block...
  11. Motra

    Honda 18cc Head

    This is a good used 18cc head from a Honda GX160. $60.00 shipped. PM me if interested. Bottom picture is the engines these heads came from.
  12. Atsownz

    Looking for Honda 18cc or 14cc gx160 Heads

    I am looking for any and all REAL Honda gx160 18cc or 14cc heads, pm what you have.
  13. MB165

    GX160 18cc head wanted

    Wanted: 18cc head for the GX160/200. Can be bare casting or ?? and not milled anymore than .025" Must be genuine honda. Also in the market for: billet flywheel, torque cam <6000rpm @ appx 11:1 comp. ratio, 22mm carb Thanks, Pete
  14. B

    18cc honda head ported & milled 100.00

    hey guys i have a 18cc Honda head milled .090, mildly ported, stock valves, new 26# springs, 100.00 shipped.
  15. wildman500

    what head would flow better? 14cc or 18cc

    What head would flow better? A 14cc head unmilled with 28.5 intake valve or a 18cc head milled to 14cc with 28.5 valve? thx:smile:
  16. boogyman

    Honda 18cc ported head

    Getting ready to sell another 18cc ported head, this head has a VERY good stock valve size or 28.5 big valve type of port job,it is the one I have on my own bike,only diff is Mine is milled and spring pockets are cut.The head will come with IF WANTED stock rockers,springs,and valves. I am asking...
  17. boogyman

    Fs. Oem Honda milded ported 18cc head

    Hey,Guys I am selling a oem honda 18cc head, it has been mildly ported, I just blended the bowls and smooth the short side. The pics of what it looks like are in my photos. I left A TON of room for the buyer to work with,So they can mill to what they want, and do a Big valve ect. The way the...
  18. Solo Cali

    Honda 18cc head 4-sale.

    Hi guys I have a real Honda 18cc 160 casting head for sale. It is complete, needs cleaned up but was working fine when I took it off the motor. No smoke, motor had good compression. Sold as is, $50 plus shipping in US.
  19. boogyman

    18cc head for sale

    I have a real good condition 18cc head I want to sell, Do to the fact I want to go with a 14cc. Because I do not have the money to mill or port.I will consider trades if someone has a 14cc head, or I will take what ever a 14cc head cost new or used. I can have it shipped 2day if liked. Pay pal...
  20. boogyman

    18cc head

    A friend of mine just gave me a 18cc head and flywheel, now I wanted a 14cc real bad, but hey the 18cc was free. Now What will be my compression if I just bolt the head on with the gx200 head gasket? and how much do I have to mill to get the compression of a 14cc head with out a flat top? And...
Top