24mm

  1. L

    24mm flat slide + manifold wanted

    Looking for a 24mm flat slide with manifold.. mikuni, pwk, oko, etc thanks
  2. roccosbike

    24mm mikuni and intake for briggs raptor

    Looking for new or very good condition VM24 Mikuni and Billet intake for a Briggs Raptor engine. Pulse fitting on intake a plus.
  3. Not so mini bike

    Mikuni 24mm flat slide carb

    Real never used brand spanking new carb. $75 shipped
  4. D

    Which carb?

    I'm sticking a Raptor on my Old Style DB30 build. I am going to switch from alky to gas. I'm looking at a Tec carb that would go on a bigger Tecumseh, and I'm also looking at the cheap 24mm slide carbs that come on the 50cc pit bikes. Which one do you recommend? I'm not looking for crazy...
  5. 11272014_053

    11272014_053

  6. J

    24mm mikuni carb kit

    have a 24mm flatslide kit comes with everything ran one time, looking for 175, local only
  7. J

    24mm flat slide intake

    Can you use a 22mm mikuni intake cut in half for a 24mm flat slide mikuni carb
  8. No Money

    jetting a 24mm mikini

    I hav a 212cc predator with 14cc mill and ported billet long rod billet flywheel 308 cam beefy rocker 26 pound springs 24mm mikini flat slide carb main jet 130 and 15 I just got a 135,140.... 17.5 -20 and 22.5 what combo should I use :confused:
  9. F

    24mm mikuni carb and Stock briggs #2 casting carb

    24mm mikuni carb, Stock briggs #2 casting carb, Tillotson, intakes Clone+briggs this is a minuni 24mm carb it came off a triumpth, it was a pair but i only needed one. Runs great. $60 stock briggs #2 carb $100 Tillotson 348B alky carb Great OPEN carb for a flathead or big...
  10. Peyote_Pete

    24mm mikuni flat slide wanted

    Want to buy a 24mm mikuni flat slide
  11. Peyote_Pete

    mikuni 26mm roundslide vs. mikuni 24mm flatslide???

    They say the flatslides provide cosiderable performance gains vs the roundslides. What is the difference in performance between the 26mm roundslide and the 24mm flatslide? is it worth the extra dough?
  12. ole4

    24mm mikuni on HS50 tecumseh

    Anyone put one of these taper bored mikuni's on a HS50? Wondering if you could share main jet, pilot and needle clip position. Thanks Ole
  13. cncd11

    24mm mikuni flatslide carb

    got a 24 mm mikuni flat slide carb w/filter adaptor and manifold w/ pulse fitting for sale. asking $125 for setup. Bought from nr racing about a year ago has about 10 races ran on it perfect working order. ill get some pics up tmrow. but u know what they look like.
  14. M

    24mm Carb for 2.8 Doodle

    Has anyone had any experience with this carb? The stocker 2.8 is a 19mm and this is a 24mm. 97cc Carburetor with 24 mm Air Intake for Baja Blitz, Dirt Bug, Doodle Bug, & Racer Mini Bikes (Standard of Japan)
  15. db30-beast

    real mikuni 24mm carb ?

    wonder if this is real ? and would fit a 6.5 clone ? MIKUNI 24MM CARBURETOR CRF50 CRF XR 50 70 PIT BIKES 125 - eBay (item 350369709443 end time Jan-19-11 23:18:46 PST)
  16. vintage33

    24mm Carb with arc manifold

    have a 24mm carb stock jetts if like new airfilter has the arc with jet manifold adaptor will fit any honda clone ect asking $35.00 plus shipping or $40 shipped
  17. wildman500

    24mm fix

    Ok I think I got the fix for my 24mm flat slide mikuni. The problem was it was starving for fuel upstairs. I started with a 130 main and 15 pilot and needle clip in center. Heres what I tried, turning in and out the air mixture screw(fail) raising the needle clip to the very top(fail)...
  18. wildman500

    24mm flat slide mikuni

    Ok guys I took the 22mm off and put on the 24mm. The bike did not like it. The bike ran like it was lacking fuel I left the carb as it was out the box. My bike struggled to spin to 6700 rpm and it was surging on the top end. It started up great and idled just as well. But the performance was...
  19. wildman500

    mikuni 24mm flat slide help needed

    Hi guys, what main and pilot jet is everyone running on there 6.5 clones? Or atleast what is the starting point? I have a modified 6.5 clone motor with the following: billet rod flat top piston arc fly wheel 14cc head stock(soon to be big valve 18cc head milled .065) 8 advanced degree...
Top