ct200u

  1. D

    Swapped flywheel, now bike won’t start.

    Swapped the stock (ct200u) flywheel to “69730 69736 Aluminum” some cheap option on Amazon. Kept the original timing key since it matches what came with the new wheel. Now I can crank all day maybe get a slight sputter but won’t run. I swapped back to the stock and now I can’t get it to start at...
  2. L

    Coleman ct200u running issue

    So I am having a lot of trouble running my Coleman ct200u mini bike. It had been running perfectly fine until a couple of days ago when I put new gas in it and went for a ride. When I got to the top of a hill and stopped giving it throttle it shut off and wouldn’t start up again. I have since...
  3. L

    Coleman ct200u running issue

    So I am having a lot of trouble running my Coleman ct200u mini bike. It had been running perfectly fine until a couple of days ago when I put new gas in it and went for a ride. When I got to the top of a hill and stopped giving it throttle it shut off and wouldn’t start up again. I have since...
  4. S

    Ct200u low power/no torque

    I got my ct200u about 3 months ago, everything was running good and a couple days ago it just stopped accelerating, i took the governor out about a month ago and never revved it to crazy limits. I took off the side cover, checked valves. It has compression (around 90psi), spark is good, carb is...
  5. B

    CT200u Honda Clone - Running Rich? Governor surge.

    I have some questions I am hoping to get advise on. I did some searching and didn't find anything useful. I just bought a Coleman CT200u. It was used so little the front tire still has the rubber hairs on it. It is a two years old and I am the third owner. The first owner never put oil or gas...
  6. Heepster97

    2014 Coleman CT200U Predator 212 build

    First thing I did when I got the Predator 212 engine was read the Warranty card, gave a maniacal laugh and threw it in the trash. Next I pulled the exhaust and intake and now they are hanging out with the Warranty card, he was getting lonely. Then I pulled the case cover and ripped out the...
  7. Dakotaman

    CT100U, 98CC Questions....

    Since hotrodminibikes.com is down right now, I've been on the search for something on par with their power-up kit for a coleman ct100u, specifically speaking a header pipe that routes under the seat and out the back and an aftermarket K&N style air filter, though all I'm finding is parts for...
  8. CFA3BB14-B6C3-4504-9378-6D8F899FE90F

    CFA3BB14-B6C3-4504-9378-6D8F899FE90F

  9. CE1BCD6B-F76B-4D98-AB99-BEF920206B00

    CE1BCD6B-F76B-4D98-AB99-BEF920206B00

  10. 4C6C6C77-EE2E-4AA8-ADF4-E2C2A7817ED6

    4C6C6C77-EE2E-4AA8-ADF4-E2C2A7817ED6

    No changes yet except for the chain.
  11. R

    Do you use a bushing between clutch/engine for Predator 212 on Coleman CT200U???

    Hello... Hoping someone here might know the answer and be able to help out... Just had my engine on my Coleman CT200U die off on me. Got a Predator 212 to put on it. But the drive shaft on the Predator is 3/4 inch while the drive shaft on the original Coleman engine is 5/8... I guess they built...
  12. D

    Ct200u stage 2 kit - anyone try it?

    From OldMiniBikes warehouse Basically includes angled air filter Bored out stock carb (jet size and emulsion tube not mentioned) 1" header w/screw on muff Valve springs (doesn't state spring tension, guessing 18lb) Choke hold bracket if this is a worthy kit, I'd like it to work well with a tav clutch...
  13. A

    Coleman CT200U 5/8" shaft TAV install

    Just completed a Chinese TAV install on a Coleman CT200U with a 5/8" crankshaft. Some say it can't be done, but I did it.
  14. M

    CT200U Coleman 39mph!

    Not bad! I painted it as well. https://scontent.fmkc1-1.fna.fbcdn.net/v/t1.0-9/19030335_10158780725845257_6716606130209492481_n.jpg?oh=8e39b920349701eaa245599ab7e314d7&oe=59E1BAF3
  15. B

    Coleman ct200u jackshaft setup new

    I have this new only mounted Coleman ct200u jackshaft setup. Plate, cover, tensioner, bearings , chain and shaft are new. Sprockets are used but in great shape as far as I can tell. I also have a brand new clutch not pictured. $85 shipped
  16. C

    My Experience in throwing a Hemi Predator on a CT200u

    Just thought I would throw out a couple of tips as I am nearing completion on this project. 1) Use the tins off the Hisun motor, you need the indentation under the cylinder/piston to fit the jackshaft setup. 2) Grab 4- 5/8"x36tpi-3/4" bolts and lockwashers to fit the jackshaft plate back to...
  17. C

    coleman ct200u with predator 420cc swap?

    Hey guys, I just picked up the mini bike after searching for a while and i know besides doing the popular mods to the stock engine, or throwing a 212cc predator engine into it. Has anyone swapped a 420cc predator engine in it? from the looks of it, looks like it would fit in the same space. Any...
  18. M

    Stock Coleman CT200U engine vs Predator Hemi. Which has more power?

    Which is better out of the box? Going to build one or the other and can pick up the 212cc Hemi for $89.
  19. M

    COLEMAN CT200U. Torque converter?

    Any ideas on the best way to drop the clutch and put a TC on these?
  20. BWX

    My experience w/ Comeman CT200U - Pretty good!

    Made some vids. Delivery from Amazon/ Package condition/ Missing parts: https://www.youtube.com/watch?v=S_PcvPh2b6s Assembly: https://www.youtube.com/watch?v=dy2iOkkRa20 First ride: https://www.youtube.com/watch?v=HZPxypEWtB8 I took the throttle limiter off first thing. I went on a gnarly...
Top