differences

  1. danford1

    #35 Chain differences

    I'm working on a Manco T-Bird with a 6.5 hp Predator. Regular clutch on the engine to a rear sprocket. 5.5:1 gear ratio. The bike has a lot of acceleration and power. The new #35 chain I just put on snapped in about 5 minutes of riding. I looked at it and it says China and 35. So yeah, cheap...
  2. markus

    H50-70 overall differences thread?

    Got a couple of mystery medium frame engines that I am going through-Incomplete/no tags. I got as far as figuring out they are both 70's style, both ball bearing sidecover, both aluminum block, and got the bore and strokes measured to see that one is an H50 and one is an H60. It looks as if...
  3. xBrent92

    Non-Hemi head on Hemi block differences? want2mod it.

    hi again, i just took off a head to a 196 Champion motor and noticed it is a non hemi head and i would like to use it if it fits. First question i'd like to ask before tearing apart the hemi: Will the non hemi fit the hemi block? i i would like to install it and so i can buy the 1.3...
  4. JohnnyTillotson

    Carb kit nut differences

    Notice a difference between the nut of the old vs new for this carb kit I bought. The one on the left is the new one and the large hole is only on one side and small idle hole directly below it. The original has two large holes across from each other and the small idle hole is about 1/4 around...
  5. ashbyota

    What is it???

    Just got this one from CL, I can't figure out what it is, but I like it! The price was right too! Any help is appreciated! THX! P.S. there was a tag riveted to the other side, but it's been ripped off.
  6. M

    Tav 2 - jackshaft?

    What are the differences between tavs and jackshafts? Is on for off road and the other for street? Is on better than the other?
  7. Boomstick

    Primary differences between HM100/Stars?

    I recently picked up a very nice HM100 for free off of my neighbor who just wanted it out of the garage. It actually runs nicely, but could probably use a good carb cleaning. It's an iron bore, and gets great compression. Now if I remember correctly, the Star is a (albeit heavily) modified...
  8. markus

    H35 intake differences

    today I dug out some engines getting ready to get something together for my Lil indian. I have decided to use an H35, but I haven't decided if I want to make it lighted or not. I pulled to 2 H35's that I have left out, the one is a rare lighted 1969 steel sleeve off a 1969 Rupp scrambler...
  9. markus

    hs40 connecting rod differences

    How is the generic connecting rod compared to a OEM tec? I'd like to throw a new rod in a motor I just put back together. Any difference other than price?
  10. markus

    Fox minicycle differences

    Does anyone have a brochure or info on what the differences were between the 10" fox minicycle/bikes 1970 timeframe. Typical posted brochures dont really show a couple of the models/versions. Wanting to know which ones came without front fender was it just the spoler that did, or was there...
  11. M

    Chain Differences

    Can anyone tell me if there is a difference in size between #40 and #420 chain? I'm about to place an order at OldMiniBikes for a few things. Thanks!
  12. patrick2260

    Differences in Bonanza Fenders

    Picked this Bonanza up yesterday. Can't tell if it's an 1100 or 1200....it's not a 1300. Any way, it has a nice shiny front fender so I wanted to swap it out on my 1300 that has a painted fender. I noticed the mounting tabs between the 2 are placed slightly different. The painted fender from...
  13. cometkrazy

    Tec HM80 Carb differences

    Are there any alternatives to the stock carb on am HM80? I see a lot of different carbs for HM80's The oem replacement is like a 100.00 it is hard to cough up that when you see other HM carbs that look identical for 40.00! What is the diff? My engine is a HM80 155053A. Any carb swappers have...
  14. S

    Flywheel differences, and lighting coil.

    Alright I start out by saying, I have 3 clones, 2 Powerease by BE, those are 210, and 1 harbour freight/princess auto 196 clones. All 3 remain stock, with no governor modifications. A few months ago we had a different clone, an ALL POWER 207cc engine, but that seized from lack of oil. I took...
  15. W

    Clutch differences

    I've been trying to get my RTS tuned after adding the mikuni carb. It's really soft taking off on comparison my TS290 is pulling the front wheel off the ground at times. Well after a homemade wiring harness meltdown I decided to pull the clutch too. The cover/ramps are different. My TS and many...
  16. J

    differences in honda z50s?

    i have 2 honda z50's from when i was a kid an 84 orange z50 that had a lot of power back when it ran and a chrome 86 special edition z50, its always been weaker then the older orang one the orange one could pull 6 kids around with in a wagon tide to the back no sweat the chrome one could...
  17. pomfish

    H35 timeline and differences

    Approx what year did the H35 go from Side Poop to rear exhaust? I always thought the Side poops were older but I have a Silver H35 with rear discharge and it is older than the white side pooper tat I have. Now I have seen some black Tec H35's with the big primer bulb in the fan shrouds...
  18. graygoose420

    Differences between mini bikes & mini drag bikes

    Well many people have given me different opinions . Let's see what comes up. Imo a mini bike is original frame work. no modifications to original frame (strech or widening). Mini drag bikes have modifications done to the frame .either chopped up a old mini or started from scratch with drag...
  19. MTchevy1

    External differences between 4 and 5 horse briggs?

    I know there's a similar thread about 4hp vs 5hp motors, but I have a different question and didn't want to hijack his. I'm restoring a bike that originally came with a 4 horse, and I have a good running 5 horse sitting in the garage. How do these motors differ in appearance? Anything really...
  20. R

    Difference Between GX140, GX160, GX200

    Are any of the parts on a GX140 interchangable on a 160 or 200? They're obviously similar, but what are the differences?
Top