flywheel

  1. D

    Swapped flywheel, now bike won’t start.

    Swapped the stock (ct200u) flywheel to “69730 69736 Aluminum” some cheap option on Amazon. Kept the original timing key since it matches what came with the new wheel. Now I can crank all day maybe get a slight sputter but won’t run. I swapped back to the stock and now I can’t get it to start at...
  2. MowKart Mayhem

    Flathead flywheel options

    Does anyone know if there are any flywheels with similar tapers and sizes as the 5hp Flathead, don’t wanna pay $200 for a flywheel that will barely get used but also don’t want to risk a cast flywheel, will any sort of clone flywheel or something like a predator or Lo206 flywheel, timing doesn’t...
  3. IMG_02593

    IMG_02593

  4. IMG_02585

    IMG_02585

  5. Studeman68

    V60 Blower housing and flywheel on an H60?

    Is it possible to use a V60 blower housing and flywheel on an H60? both are early (around 1969-1970 engines) Thanks!
  6. BWL

    PVL flywheel vs ARC flywheel

    What's the difference between these flywheels, and which is better? I've only ever use ARC flywheels, but have been wondering about this one.
  7. MotoMagz

    Ultra lite billet flywheel ARC Predator Hemi

    I have Less than 30 miles on it. I will trade for a nice straight billet flywheel for a Hemi or Sell this for $100 shipped save ya $30 some bucks...... also I have a motorized bicycle so I don't post a lot here. But I get all my technical info here! Ultra-Light SFI Certified Billet Aluminum...
  8. MotoMagz

    ARC Ulra lite Billet Flywheel

    I have Less than 30 miles on it. I will trade for a nice straight billet flywheel for a Hemi or Sell this for $100 shipped save ya $30 some bucks...... also I have a motorized bicycle so I don't post a lot here. But I get all my technical info here! Ultra-Light SFI Certified Billet Aluminum...
  9. D

    Loose Flywheel Nut on DB30R Stock 97cc Engine

    My pull start is out of commission and while waiting on the new assembly to arrive, I tried starting the engine using a cordless drill and 11/16 socket. The engine started up, but the nut on the impeller loosened up and caused the impeller to fall off while the engine was running. I tried...
  10. danford1

    Briggs Animal flywheel puller

    I'm working on a Briggs Animal engine. It has a PVL flywheel on it. It requires a simple puller like this one from Amazon. The problem is if I ordered it today it wouldn't arrive till Tuesday according to their web site. I would like to make one tomorrow and not wait 5 days for one. Does anyone...
  11. J

    How to Pull a flywheel easily on a H50?

    Have a H50 that I need to pull the flywheel on to check out the kill switch wire, bike was running fine last summer then died and wouldn't start. Cast Iron Flywheel has no tapped holes for pulling. Any ideas?
  12. Not so mini bike

    Briggs ARC rods and flywheel

    1- ARC 6377 stroker rod in box. Looks like it is slightly used $52 shipped 2-ARC 6370 stroker rods. Used. $45 shipped each 1- ARC 6213 stroker special rod. Used. $65 shipped ARC flywheel. Used. Looks like aluminum was welded in for weight or balance. $55 shipped 4 spring 2 disc smc clutch...
  13. trinik7597

    Honda gx200/clone billet flywheel and timing bracket

    Ambush racing billet flywheel used once like new and an ambush adjustable timing bracket new with coil $80 each shipped or $150 for both to same location .. can text 845-505-2198 for pics or I will post some in a little while
  14. jeffdubb8

    H35 Lighting Coil Flywheel Questions

    I have an Aspera HT35 from the 1960's/1970's which for all intents and purposes is the same as an H35. I recently got an H35 lighting coil from an OldMiniBikes member and the flywheel rubs against the coil. Question is: are the flywheels on the lighted H35 engines different than the flywheels on the...
  15. F

    Billet Flywheel with Pull-Start

    Hi. New to the board. Does anyone make a 5HP Briggs (Flathead) billet flywheel that can be used with a pull-start? I want to do some mods to improve performance, but I believe all the billet flywheels are set up to be started with a portable starter. Looking forward to comments. T
  16. CandyBandit

    new member working on saxonette flywheel

    Hello everyone Ive got alot of projects but what Im currently working on is an Arctic Cat Whisker I picked up in Duluth Mn. Its a nice survivor but it has low spark not even enough to get through the spark plug. Further inspection revealed a wire coming off the coil is pretty corroded. Ive...
  17. V

    WTT predator 212 ARC billet flywheel

    Looking to trade a predator billet flywheel for the same flywheel for a gx200. Thanks
  18. trinik7597

    Arc Honda/clone flywheel

    Arc gx200/clone flywheel excellent condition $65 shipped
  19. trinik7597

    Arc flywheel

    Predator non hemi ultra lite billet flywheel like new condition $75 shipped part#6602p
  20. markus

    Tecumseh Flywheel late model H50-60-70 lighted 611087

    Looking to see inf anyone has a late model big taper/electronic ignition "lighted" flywheel available. Part number is 611087 fits the H50 60 and 70, or the conversion parts to make the lighted assembly. I sent a PM to Tmack but have not heard back if he has any of the parts or still does the...
Top