hunting

  1. W

    I should stay warm hunting this year

    I made this blind out of sheets of 1 5/8th inch structural foam with 1/16th sheets of a thermoplastic laminated to both sides. It is rigid enough to walk on supported 4 foot apart. The blind has removable Lexan windows. A 4 by 10 foot piece of this material weighs less than a 4 by 8 piece of...
  2. WrenchDad

    Hunting ammo feedback request.

    Hi all My Son is going hunting for the first time next week (this was unexpected). Currently I dont have a hunting rifle that will fit him. I do have available a bolt action 410 shutgun with slugs. I already know the obvious challenges with such a small gauge but I also know under the right...
  3. BWL

    Hunting Bream, Caught a Rainstorm

    https://www.youtube.com/watch?v=eEmuB8oK_oQ
  4. Mr Big Mini

    hunting with mini bikes - pics thread

    just curious if anyone takes there mini bike hunting. i'm new here and i just wondered if there where any hunting mini bike folk.... .... :scooter:
  5. W

    Hunting or trail riding, we are ready

    Last Sunday my son and I took the mower and walk behind bush hog to the little farm and I cut the roads, shooting range, and what we call the picnic area by the back pond and my son used the walk behind bush hog and cut trails through the woods. He really outdid himself this year and we have...
  6. guardrail dave

    Bonanza hunting

    I did some bonanza hunting this week and came home with a few new toys It looks like i will be busy for a while
  7. Cyrilak

    Mini Bikes With Rear Suspension?

    Hey all, new here, I was wondering if anybody knew of any minibikes with a rear suspension. I was looking at the baja warrior/mb200, but it only has a front suspension. I plan on buying a minibike for hunting, and some serious trail riding. :scooter: I don't want to fiddle with a bike that...
  8. M

    Hunting Idle

    Hi, new guy here. I have a Baja mini-Baja with the 5.5 Honda clone engine. I cannot get the bike to idle correctly no matter what I do. The idle is constantly going up and down. The carb is new and the low idle is clean and so is the main jet. Anyone have any ideas I can try? What is the...
  9. jeep4me

    Michigan Deer Hunting 2012

    Thursday, Nov.15 was the opening day of Michigans annual firearm deer hunting season. I took Thursday and Friday off from work to take my daughter hunting. (my son shows absolutely no interest in killing animals for sport) After two days of not seeing a buck I could shoot (shot a running 8pt...
  10. Artrockets

    An airplane front tire? What is it?

    Any ideas?... It's definitely had some custom work done to it... Guy said it was some kind of hunting bike, that's why the back extends out, to carry out whatever size game you got. And he said it has Vespa handlebars.. sorta' dig the way they are cut and re-welded. Also the rear sprocket mount...
  11. Cotmullion

    Briggs 5hp throttle hunting HELP!!!!!!!!!!

    OK, I briefly got my 5hp working fine but now the engine has recently began hunting and running irratically. Basically, you start it on full choke and it starts after 2 or 3 pulls which is fine, but it runs too fast (although that might be because the idle screw is wound all the way in). When...
  12. T

    Mini bike for hunting

    4 wheelers are too big and bulky to transport and work through dense brush where the game hides. anyone using a minibike? how did you rig it up? thanks
  13. Bonanza Bryan

    A Good Day Hunting

    My Dad went out hunting this morning and got himself the first turkey of the season. Shot him right in the neck at 22 yards. I wish I could of gone but I had to be at school at 7AM. Well at least we don't have to starve for the next few days.
  14. Truckasaurus44

    What I'm hunting for

    Hi Everyone. Here's my current shopping list: 1) Straight lower fork tubes from a Gilson, Montgomery Wards, or Allis Chalmners bike. Need two. 2) F&R fenders from a Gilson, Montgomery Wards, or Allis Chalmners bike. Need two. 3) Broncco Rear fender. I'm looking for the version that...
  15. toromudder

    6.5 black clone hunting problem

    engine runs best in 1/2 to 3/4 choke and hunts in idle and full throttle and i have to slightly press the gas to keep it from stalling in idle. Lean jet? im new to clones so any help is appreciated. Im thinking a richer jet maybe a #90, and a gx140 emulsion tube would help it.
  16. blkscorpion80

    Clone is hunting at high rpm

    Guys I have a 6.5 on my trailhorse and its running like :001_9898:. Before I had the clone on the TH, I had it on my arco (straight drive) and I had the same issues but on a smaller scale. I could actually get it to full throttle before it would act up. Basically when I try to wind it out, the...
  17. B

    New guy hunting an old tiger

    When I was a young boy in the mid 80's, my Dad pulled out his Muskin HPE Cat 300 XL from my grandfathers garage. He took it to work and got it running for me. I can't tell you how many hours I spent on that old cat. Some of my best memories of my childhood were on that bike. Sometime after I...
  18. S

    5 hp briggs "hunting"

    Just bougt a 5 hp briggs for my Boonie, i Can't get it to smooth out it runs best with the choke almost fully on. It hunts for a steady idle until it cuts itself off. I have put in a new diapram and cleand the tank and clear the jet with a tread of wire. Everthing seems clean. Any ideas?
  19. I

    South Texas Hunting Rig

    notice the camo job. the gun rack, the flag. thats how its done here in south texas baby complements and constructive criticism welcome
Top