Hey everyone! I am fairly new to the minibike community but I am hoping to get some help. I have a complete all original 1969 Heathkit Boonie Bike with all attachments. However, the magneto in it to power the turn signals, headlight, and brake lights is busted. Does anyone know how I can cobble...
Also need the mounting nut and washer and a spacer if there is one. This engine is a Morini Franco Turbo Star of 1972 era vintage. I have the coils and plate.
Hi all,
Newbie here. I was wondering if there is a kit or mod to change the points magneto out on a HS50 to a solid state type? Thereby getting rid of the points.
Thanks for any help.
I asked this yesterday but I think in the wrong forum, Anyone know what this fits ? it is tecumseh # 32365 it's missing the coil and condensor but it has the plug for lights,
I painted my hs35 and when prepping it for paint I removed the magneto. How do I reset the gap? For some reason I remember using a business card back in the day:)
I just pulled out my Arctic Cat Prowler from storage and i'm not able to get any spark when pulling the recoil.
I remember hosing it down after a muddy day of riding about 15 years ago, and was never able to get it started after that...
I've pulled off the flywheel to take a look at the...
I bought a H50 Light coil and flywheel from and OldMiniBikes member to convert my non-lighted coil H50 into a H50 w/light coil.
Prior to install the H50 ran perfect and I heard after you remove a magneto it's very heard to get back into correct position. But I still thought what the heck I will give...
Well, working on my Tecumseh H35 that has no spark, here's the serial number info:
Pulled the flywheel to find this: Broken mounting tab on the coil
Here's the part number from the coil itself:
My question is, where can I find that or a suitable substitution? There was a couple...
Can anyone please explain how to test the magneto components on the MM5A Indian engine ?? :shrug:
We have NO spark ?? I see the points & condensor, coil and ignition in there as well.. We have NO spark.. Is there a way to test ea. of these pieces to see which one has gone bad ?? :confused...
I came across what looks to be a modified Super Bronc VT-8. The first step is to get it running but no spark. What's the best way to determine why there is no spark? I'm not much of a small engine guy and have never seen a magneto like this.
My Tecumseh H50 65242H is running rough and I found a good read on checking the coils. Also I want to find out more about the core plate group. My plates seem to have spread apart or fanned out a little and I'm wondering if there is a way to repair it or if it has a huge impact on the firing. My...
My brother wired the lights and made up battery cables and fixed a broken wire going to the alternator . When we put power to it saw a little smoke from the mag area after that motor will not run has no spark . So pull flywheel to check points they looked fine , had a old condensor that is good...
I had a old mini Briggs and Stratton 5 hp engine that I tore off a mini bike. Im not sure of the year of the engine but it dose not have points and has the more modern magnetron but the engine is still pretty old. The engine was run with no air filter but it wasn't run very much. I only took it...
Pardon me but I am a newb
I have a briggs engine. The magneto has one wire going to the plug and another thin ground? wire not sure. But if I plug the black wire to the bottom of the magneto it wont spark. Right now I have it disconnected, it runs, but the only thing I notice different when I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.