pull

  1. J

    I think I am ready to pull the trigger, anything sound wrong?

    After a few weeks of bothering people on here I think I am ready to order parts and begin. Goal is to end up with a Tote Gote type able to carry two adults or one adult and 1/2 an elk. So a 400 lb payload. No tubing bender so using rect tubing. Getting inspired from the frame of the Trail Buck...
  2. J

    I think I am ready to pull the trigger, anything sound wrong?

    After a few weeks of bothering people on here I think I am ready to order parts and begin. Goal is to end up with a Tote Gote type able to carry two adults or one adult and 1/2 an elk. So a 400 lb payload. No tubing bender so using rect tubing. Getting inspired from the frame of the Trail Buck...
  3. BBQJOE

    Help!!! Engine starts when I pull cord.

    Almost every time! I just don't get it. Please help. Maybe I should jack with the carb?
  4. J

    How to Pull a flywheel easily on a H50?

    Have a H50 that I need to pull the flywheel on to check out the kill switch wire, bike was running fine last summer then died and wouldn't start. Cast Iron Flywheel has no tapped holes for pulling. Any ideas?
  5. CarPlayLB

    Cite side pull throttle

    This is a Cite side pull throttle in pretty good shape. Turns smoothly...and that's with no grease! The pin that keeps the assembly together is stripped and will not come out. Will not need to be removed for operation or refurbing. I did not try real hard though! This fits over 7/8" bars, but...
  6. SimpleTom

    Coleman Sport 2.40 with working original pull start

    I'm listing this for my brother in law Matt. You can PM me for his phone number if you are interested. It's pretty much all original even has the tool bag mounted under the seat. The pull start works and the engine has spark. He is looking to get $500 o.b.o.
  7. B

    Just needs a pull start.....

    sears runabout vintage minibike
  8. CarPlayLB

    Briggs 5HP aluminum pull starter and round shroud

    This is the old school aluminum cast pull start with the round blower housing. It has a couple dents, but otherwise in good shape. Like all old Briggs pull starters, this could use a good cleaning! $40.00 shipped lower 48 willing to trade for smoked salmon only!
  9. Spoildface

    New Predator 212 Very hard pull

    Hey guys bought a fresh predator motor and first thing I pulled the govenor and guts out, put an ARC Flywheel on, Higher tension Valve springs, and an air filter and jet kit. But I did not touch anything else. Now I went to break it in the other night and oiled it, and as soon as it hits...
  10. T

    Predator 212 hard to pull

    Hey, so my predator 212 is having an issue. After a day of riding it until the gas was out, I leaned it up against a tree outside, I think that there were light rains. Went out next morning put gas in it and it wouldnt pull. The motor is completely stock. Oil level is full. So there is a...
  11. C

    Can't get a Predator 212 to pull.

    Few weeks back I bought a used go kart for my son and it has a Predator 212 on it. It of course needed a few things fixed and similar. I thought it would be a good project for us. I understand many things mechanical but engines have never really been something I have put a lot of time into...
  12. markus

    pull choke carbs-5hp

    is there any good threads or sites showing any info on these, getting the maximum out of them type stuff? I want to retain the pull choke carb and flat tank to keep the period correct look to go along with the bike. what did they do to them back in the 70's :shrug: thanks
  13. B

    WTB 5hp B&S blower housing and pull start

    Just picked up a nice 5hp Briggs that was used for kart racing, I'm looking for a clutch style blower housing and pull start. Thanks
  14. C

    Fairbanks Morse recoil pull starter for Tecumseh engines

    Fairbanks Morse pull starter for Tecumseh engines nos with slight shelf wear located in Wilkes barre pa $35 +$7 shipping PayPal
  15. N

    Tecumseh 8 HP 10 HP pull start, may fit others.

    Working pull start assemble for Tecumesh. Only issue is chip in handle and a some scratches in the bad over sprayed paint. $20 shipped to you door. https://drive.google.com/file/d/0B0v4U_rswuqdOUxtMEJxYXV2TTQ/view?usp=sharing
  16. Twid

    Briggs raptor 5hp blower housing pull start help

    I'm doing something wrong what am I missing!
  17. CarPlayLB

    Briggs pull start

    Get it before it goes to eBay! Brand new pull start for Briggs 5HP and Raptor style engines with the starter clutch. This is brand new. To your door for $28.00. Turk Bros. have these at $48.62!
  18. Dragbikemini

    Tech 5.5 OHV Pull Start

    Looking for pull start and maybe some other items for OHV 5.5 Tech. Perfer cheap as this is a basket case gokart project that might not work out. Have Paypal. Thanks Doug. 914-494-1288 if you like to text.
  19. B

    Does a 1.3 rocker make an engine harder to pull start?

    After the advice given earlier here, I threw a stamped 1.3 rocker on the intake of our Predator 212. Set lash carefully to .003 on each intake and exhaust. The engine is extremely hard to pull start compared to before. Prior to the clear install, it was like pulling a lawn mower starter...
  20. CarPlayLB

    Fairbanks Morse pull starter new OEM

    I have a brand new Fairbanks Morse pull starter. This will fit Some Tecumseh's, Kohlers, and West Bend engines. This is in a Kohler box, but FB made these for Kohler. Labeled FB on inside. This is NOS and has some shelf wear. Cheaper on OldMiniBikes than eBay at $110.00 shipped. PM me if interested
Top