I have to add a fuel pump to my build and do not want to drill holes in the frame.
What options are there for mounting a Walbro pump?
Can they be mounted vertical vs horizontal?
Or does that matter?
Thanks in advance.
I can get a Homelite water pump with a Briggs 3 Horse on it but is the Shaft notched for a key way ? If not what are my options? I got a machinist at work. Thanks and this motor is NOS!
i was going to post in tech section but i think all engines and tanks are different.
Parts: gx390 carburetor and 35lph mikuni fuel pump. 1/4"inch "T" fitting and line.
So i've been working on my engine for many months trying to pinpoint why the engine either wont start...
Fuel Pump works, carb is for parts. Motor ran good, linkage was messed up and the thottle got twisted around bending the plate. Was painted white/red/black at some point. The butterfly throttle plate was bent, so I took it off.
$17 shipped. I will have more 10 Hp parts since I am parting...
I am building a another Hemi engine and this time would like to add a little more compression. I want to still run pump gas (91 octane). Its for my Original Doodlebug.
Here is my setup.....
ARC flywheel
Black mamba Jr cam
26lb springs
gx140 emulsion tube w/Jets
Intake
Under Seat...
Trying to finish up my turbo Lifan project. Does anyone have any tips on getting 12v from the stock flywheel to power the oil pump? I read I need a genuine GX160 Honda flywheel to accomplish this. Is this true? Any tips would be great!
Walbro Fuel Pump | Go Kart | Mini Bike
Does it matter how this is mounted? Does it have to stand up or can it lay flat? Can it be at an angle? Should it be below the tank or above? How much venting does the fuel cap need to compensate so there is no vacuum?
Whats the deal with making a supercharger for small engines out of a automotive smog pump? Saw some on youtube(search: roots supercharger mini bike) and Im tryin to find some details. Anyone done this before?
stuff to add .. fuel line,fuel pump, top plate assembly for both throttle and fuel pump
Question...
Can I place a T in between the new fuel line of the stock breather hole in the valve cover & new line & a catch can ?
hey everyone.. has anyone put a pluse fuel pump on a briggs and stratton 3.5 hp? what location would be best to install into the motor at? could i just use the breather assembly some one with this pump or go ahead and tap into the case somewhere? and if i do what location would be a good...
I am planning on using an Hs50 carb on my Briggs 5HP. I have done the billet upgrades. Due to the fact that nothing I build is easy or conventional, I will need a pump to get fuel to the carb. I am using a Walbro pulse pump. Will the needle and seat have sufficient ability to handle the...
I want to run a Dellorto UA19s on my next build (HS50), I sort of want to keep the steel engine mounted tank on the front of the engine though, problem with that though is the dell is going to sit higher than the bottom of the tank.
So I either have to run a pump, make an intake that comes...
mikuni fuel pump $25.00 plus shipping out of CA .. money order preferred... might except paypal have to go through my buddie.....
click on pics to make them bigger!!!!!!!
As you know, I live on a lake and we are plagued by Eurasion Milfoil and a lot of plant sediment from over the years. There is a guy going around offering to dredge the plants and sediment using a pump and hoses on a pontoon boat. Turns out he just pumps from the shallow areas and discharges...
can someone tell me how this all works? i see lines coming out the valve covers and crankcase on some motors and they seem to go to a fuel pump and intake manifold. anyone have a diagram of this?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.