remove

  1. Sixpac440

    How I remove fork buttons, springs and lowers from a Bonanza .. 1 pic

    Soak for a couple days with PB Blaster or what ever ... Get a few 5/8 x 1" or so dowels ... put them in the grip end and pound! :thumbsup:
  2. Sixpac440

    How to remove old paint without sandblasting?

    Is there a spray on rinse off product? I will sandblast later ... just want it cleaned up a bit as I work on the bike ...
  3. S

    How to remove forks from a Murray?

    Finally getting to tearing apart my murray to repaint, how do i remove the front forks? Seems like the pivot tube was welded in durning assembly. Wanting to take it to the blaster to have it stripped. Also looking for a source for some parts to it, needing the upper fork nut for starters...
  4. teched

    How to remove picts, so I can post more

    Hi guys, I have seemed to reached my 50mb limit, but would like to add some more picts to my Mud Bug Project Post. I tried to delete, but it only showed one check box to remove, but I have 20+ picts that could be weeded out. Thanks
  5. t-royMN

    how to remove jackshaft w/o breaking anything

    I have a Couparral Tony Pony minibike and it has a jackshaft on it that I want to remove to paint the frame. I've never removed one of these and I don't want to screw it up (it works great). Any advise on this. I can see the bolts holding it to the frame, but do i need to drive the shaft...
  6. danford1

    How do I remove my uploaded pictures? I ran out of storage room.

    How do I remove my uploaded pictures? I'm trying to post a picture in the What Is It area. I can't because I have to many pictures in the account. I ran out of storage space. How do I delete pictures I uploaded? I can't find a delete button anywhere and right clicking doesn't help... Danford1
  7. B

    How do I remove 1968 Rupp Jackshaft bearings?

    Title says it all. I have both an XL500 frame and a TT500 frame. Trying to restore both. Thanks in advance! joel/Bink
  8. BBQJOE

    How to remove a packrat nest. (AZ style)

    https://www.youtube.com/watch?v=DqtxmAebe80
  9. SIMPLEARKANSAN

    Trying to remove the driven pulley on Alsport Trike

    Is there any trick to this? Ive loosened both lock nuts on each side of the driven. I've sprayed WD40 and let sit over night, heated with a torch and haven't moved it a bit.:hammer:
  10. t-royMN

    chrysler 82015 - how to remove the clutch

    i have Couparral - Chrysler 82015 engine with the original snowmobile clutch attached. How do I remove the clutch? Looks like a Salsbury clutch for belt operation. Thanks T-roy
  11. 2SlickNick

    Crack in differential

    Hey guys, as I was cleaning up differential I noticed a crack in the bushing. This might have already been there or maybe I caused it when removing axle - :shrugs: I don't know how to remove or even where to get another...... Should I just apply a small light coat of jb weld to prevent...
  12. J

    gx140\160\200 2:1 gear box

    I can`t find much info on this thing. Is there a way of adjusting the take on the clutch? Can i just remove some of the weights? the clutch is working but it takes at to low rpm...
  13. K

    Cleaning aluminum

    What are you guys using to clean aluminum? I have some Rupp wheels that have turned white,I can put them in the bead blaster,but if there is something I can soak them in and remove the corrosion I would rather.I know that on some old car parts,namely zinc and aluminum tag plates,I soak them in...
  14. IJG

    wheel bearing removal?

    Any ideas to remove them,?
  15. J

    Jackshaft Removal Help Please - Lil Indian

    So I'm prepping my Lil Indian with the hope of getting it to the paint shop in a week or so. It is now time to remove the jackshaft, and I don't want to break anything! I plan to buy new bearings, but how is the best way to remove the jackshaft? :out:
  16. 2SlickNick

    Cam decompression mechanism

    Hey guys, I recently pulled the gov on my 6.5hp clone. Put everything back together reset valve lash at TDC. Occasionally now on about every 3rd pull, the pull cord is pulling back; hard..... Once started it runs as it should. I have read this it the compression relief mechanism...
  17. JohnnyTillotson

    Chainsaw Clutch removal

    Anyone have experiance getting a chainsaw clutch off? I'm trying to get the clutch off of a chainsaw that has hardly any room around it to put a gear puller's arms around it. It's sunken into the frame of the chainsaw frame. Whats worse is in order to get the motor out of the chainsaw frame...
  18. flpmurphy

    db with tav

    Just picked up this tav30 off eBay new for 60 bucks. Got it installed with a little work. Had to remove chain tension mount and chain gaurd mount. What a difference this tav makes.
  19. mikelavite

    mini bike Jack Shaft ?

    ok guys I picked up a verry cool looking well built Mini Chopper last year it has just been sitting . so this winter I want to get her running . it has a Honda 125cc steet bike engine on it . it has a jack shaft set up . I am a gokart guy . so my question is . i want to remove the 125 shifter...
  20. ole4

    HS50 valve guides.

    Does anyone know the correct valve stem to guide clearance? Also has anyone removed the stock cast iron guides? If so how do you remove them. Wondering if they can be pressed out or if they are cast in and have to be machined out.
Top