replacing

  1. Sixpac440

    Replacing a cat99 TAV with a Series 30 TAV on a Hilltopper ... PICS

    NOTE *I made my own jackshaft a while back to replace the worn one so this isn't 100% accurate to a stock jackshaft install. * The driven and Driver are 30 Series Chinese, the belt is genuine Comet #203590A While I had the shaft out I put 1/4-20 tapped holes on the ends of the shaft ... I...
  2. D

    Replacing tired motor with new predator

    Hi my son has a doodle bug with stock motor on it. The motor is worn out and time to replace it so I am going to get him a new predator motor on Friday but my question is besides the plate to mount to frame what will he need? I plan to later allow him to mod motor but for now just leaving...
  3. J

    Advice on Replacing Rupp Seat cover.

    Just wondering if anyone has replaced there Rupp seat covers. I bought one from ebay and it came with some button things that you apparently push through the fabric and then bend the tabs on the other side of the seat pan to secure them. Do you drill out the old snaps on the metal seat pan and...
  4. JohnnyTillotson

    Help replacing gas cap rubber

    Can anyone tell me how to get this old rubber out of this gas cap? a It's old and dry and useless and gas leaks out of the tank. It doesn't look to me like the rubber goes around the center metal section but rather most of it seems under the metal. So I assume I have to turn this metal piece...
  5. M

    what upgrades are you working on.

    Let me start off by saying thank you OldMiniBikes WAREHOUSE yall never let me down. Hello fellow mini bikers. What are you guys working on. For me it my tav replacing brakes and all fluids. Oh and I got a set of some cool street tires.:facepalm:
  6. Zach112688

    Replacing Throttle

    so i realize i can just measure this myself but my bike is at the shop and i want to order it tonight. Can anyone tell me if i need a 7/8 or 1" Throttle control? Old school DB30S-169 if it matters. i looked through about 30 threads and dont see it since anyone could really just measure. i will...
  7. T

    Advice for replacing swingarm shaft (Quasi-Stellar)

    Currently working on building this Quasi-Stellar frame. The only thing that is preventing me from finishing this build is the swing arm bearings and axle. The axle is shot and I definitely need a new one. The bearings are a bit sad but I am not sure what I should replace them with. I believe...
  8. B

    Replacing 6.5 clone crank seal without removing crankshaft

    I need to replace the crank seal on the flywheel side. I don't mind having to remove the flywheel, but I would like to remove the old seal and put in the new one without removing the crankshaft. Is there a good way to do this?
  9. ogygopsis

    Replacing Rear Sprocket On Fox Campus Bike

    Last week I purchased the 1962 Fox Campus bike shown in pic#1 from Smallbikes88. The teeth on the rear sprocket were worn nearly flat (pic#2) and needed to be replaced. On all the steel wheeled Foxes the sprockets are welded directly to the hub assembly. However, a few minutes on the bandsaw...
  10. creia

    Replacing the needle SEAT in a carb

    For anyone that has done this, can you give me some guidance?:confused: 1. How do you get the old one out? 2. Ho do you properly set the new one in? (i.e., proper depth) If it makes a difference, this is for a Tec OHH60 Powersport Thank you for any words of wisdom.:scooter:
  11. loampey

    replacing old style recoil starter

    A buddy of minie just give me a 5 horse with the old style clutch and recoil starter. the engine is in great shape except for the recoil starter and housing they are beyond repair. Can I replace with the newer style starter with the cup.:shrug:
  12. loampey

    Replacing plastic cam in newer briggs 3.5

    where can I find a steel cam to replace the plastic cam in my newer 3.5 and will older 3.5 vertical engine cams work in a horizontal?
  13. creia

    Replacing brake pads on the Doodlebug

    Using the search function on this forum I have already found some suppliers of pads- Thank you!:smile: My question: How difficult is it to replace the pads?:confused: Any words of wisdom, do's and don'ts, or other tricks of the trade from any of you that have replaced them? I am reasonably...
  14. gumpit

    Is there a video for replacing the Rod/Flywheel

    Anywhere online a video showing how to replace the connecting rod and flywheel with a billet one? I bought just the rod and flywheel. I need to know how to torque it down/torques and if there is any other special sequences or things I should know about removal and replacing. I did remove the...
  15. DreyeIce

    Replacing Plug Wire,,

    I have a briggs 5hp, the points are set up perfect, clean and sealed off, the coil is nice and clean and the flywheel has mad magnets, so theres no reason i shouldent get good spark, but, the motor was sitting outside without a boot on the plug terminal thing, and i think the rust may have...
  16. vette66_00

    Video: Replacing Valve spring and setting lash 6.5 hp

    I did a little video on replacing a Valve spring with a 18lbs one and setting the lash. Video is only of the exhaust but its the same way for both intake and exhaust. Should be good enough to get most people though doing it. LMK if you have any other questions or suggestions to improve. I think...
  17. D

    Replacing the Pull Cord...

    Anyone know of or can point me to a guide or even a video on how to replace the pull cord on a DB30? We bought it a couple days ago and today the pull cord snapped. Thanks in advance for your help.
  18. M

    Replacing the clutch bushing

    What would be the easiest (smartest) way to remove the old bushing? (Max Torque). I was gonna pass a torch over it, to see if it melted off, but a little voice in my head told me to come ask the guru's...I have the clutch apart already.
  19. D

    Replacing tires...

    okay, my wife and i are killing the tires on our new doodlebug because we're riding it around so much. simple question, probably a dumb one... can i replace the tires myself like i would a bicycle tire? or do i need to take the wheels somewhere like discount tire and have them mount the...
Top