running

  1. tellegubby

    Introduction

    Hello all, I joined this forum since I recently acquired the minibike I had as a kid. Kawasaki MT1A (1972 or 1973 I think, not sure which). Still runs after sitting realistically probably about a decade (maybe some light use through that period). My family bought this from someone (a neighbor...
  2. E

    97cc running issues, looking for input.

    I know, I know, just swap it out for a 212. But I already have the 97 and I'm trying to complete this one on the cheap. Before I got it the motor hadn't run in years. The gas tank and carb were gummed with varnished gas. I grabbed a replacement carb off Amazon and a new gas tank. The motor...
  3. BWL

    Motor Running, Squeaky Noises, Metal Shavings Found

    https://youtu.be/DyUxZgfwvU8 This motor ain't running right. If you have the time watch the video to see what I mean. Any ideas?
  4. Fat Tony157

    Running out of fuel with 15 degree mount

    What's going on guys. I need some suggestions to fix an issue I created for myself on my build-off bike. I'm running a predator 212 hemi and I had to use a 15 degree engine mount so the torque converter would clear the frame. I'm running the stock engine mounted tank. The problem now is most...
  5. B

    WTB: 3 Ealry 70s Tecumseh H35 engines complete/ running. Need 3

    WTB: 3 Ealry 70s Tecumseh H35 engines complete/ running. Need 3. Looking for real mini bike engines only. Must be 1969, 1970 or 1971. Prefer intact and running motors. We will cover shipping the units. Any help greatly appreciated. Thanks in advance. Please PM me or choppercarm@gmail.com...
  6. M

    Broncco Laser is running

    Runs good, rides smooth, the refinishing can wait till winter time!
  7. danford1

    WTD Good running Predator or clone engine

    I'm looking for a good running used Predator or clone engine. Local to south east Michigan. What do you have, how much, where are you located? Danford1 PS Yes I know you can get them new for $99 or less. I'm helping a guy out on a tight budget build... Used ones are way cheaper.
  8. Johnwesley

    Got it running kind of, help

    Just got the db30 running, but it only runs on fuel to 3-4 choke. Anything less and it just dies. I let it idle for 5 minutes on choke and it still dies when choke is turned off. It will accept gas with 3/4 choke. I'm thinking vacuum leak but haven't checked it yet as I'm out of town. What your...
  9. X

    Honda 50 not running right

    So this is my first Honda. I bought this for my son as I have always thought it would be a great starter bike. When it got it, it didn't run quite right. It smoked real bad. Long story short, I replaced with new parts the entire top end, piston & rings, and carb. I can get it to run, but it...
  10. danford1

    Running a HS40 non slanted intake on a slanted engine.

    I'm working on a Rupp Scrambler with the slanted engine. I have a HS40 I want to put on it but it doesn't have a slanted intake. I'm sure I'm not the first one to do it. What are your experiences using a non slanted intake on a slanted engine? I'm searching for a slanted intake but haven't...
  11. L

    212 predator running rich

    My engine is running rich I have a140 emulsion tube and a 36 jet in the carburetor. I have not really ran the engine it only has 2.8 hours. Most of this time is at idle for break-in period is that why it seems to be running rich and it will cure that issue when ran at more RPMs. I also have high...
  12. P

    B&S 3 hp model 80202 running hot

    Hi Guys , I have a Vintage B&S 3 hp model 80202 with two oil caps and two drain screws. My first question is i only put oil in one side , and fill it until i saw a little oil coming up before it reached the treads of the oil cap was that correct . My second question is a after running it for...
  13. BWL

    Mud Motor | Tuned and Running

    https://www.youtube.com/watch?v=SzT5ElQu7MI I guys I'm new. I've been working on this motor since this spring. Just now getting it tuned and running. I use this as my outboard motor for my boat. It's a Predator 212 motor. I hit 6360 RPM, and the billet connecting rod and billet flywheel kept...
  14. D

    Clone (Carroll Stream Engine Co) running lean

    Hello My CS 6.5HP clone runs lean and needs to be choked nearly every time I start it. I've heard they run much better with fatter jets in them. I also if richer jets will allow it to start better without having to use the dang choke (even when warmed up). Can anybody enlighten me as to...
  15. ReapersRide

    My Briggs 5 HP Manco Dingo Engine is running!! It lives again!!!!

    Finally got the new Carburetor on and couldn't get the throttle response I wanted. Then I realized I forgot a crucial element to the issue. I replaced the fuel tank!!! I needed to adjust the govern spring where it connects to the throttle. So if anyone is interested here is anther video...
  16. ReapersRide

    My Briggs 5 HP Manco Dingo Engine is running!! It lives again!!!!

    Finally got the new Carburetor on and couldn't get the throttle response I wanted. Then I realized I forgot a crucial element to the issue. I replaced the fuel tank!!! I needed to adjust the govern spring where it connects to the throttle. So if anyone is interested here is anther video of my 5...
  17. D

    What Sprockets Are You Running?

    Hi, new guy here, been lurking for a few days. Bought a barely used (original gas in the tank) Baja Racer 97cc and after doing gas n oil change, it was underwhelming to say the least. Threw a Predator 212 on it and am very happy with the low end torque. Can ride me and my 4yr old son on...
  18. B

    Honda clone (196/208) running rich?

    Hey guys first post here! Bought a mini bike second hand off a guy. Has a Powerfist motor on it, unsure if it's a 196/208. They're basically the same from what i read anyways. I proceeded to straight pipe (1") it and externally remove governor (yes yes i know remove it internally, I will very...
  19. M

    oil viscosity what are you guys running

    I'm curious to find out weight and brand personally I'm running 0-40 mobil1 on a heavily modified predator and it is beautiful inside of the motor, one would almost think it's a new motor but reality is its over two years old and gets beat down regularly by me and everyone I know thanks in...
  20. 1

    Rupp Roadster 2 Engine Tecumseh HS40 Lighted W/TAV Complete & Running

    Runs excellent. Can send pic/video of actual engine running upon request. Serious inquiries only. 1st $500 FIRM.
Top