sensor

  1. 20201121_144143.jpg

    20201121_144143.jpg

    Adding a fuel level sensor to gastank
  2. WUPP-Motorfiets-panel-Snelheidsmeter-nachtzicht-wijzerplaat-Kilometerstand-LED-multifunctionel...jpg

    WUPP-Motorfiets-panel-Snelheidsmeter-nachtzicht-wijzerplaat-Kilometerstand-LED-multifunctionel...jpg

    Tachometer with build in digital speedometer. Incl sensor.
  3. E

    Oil Sensor

    Ok, I just swapped out my old 196cc baja engine with a new Rato 212cc from Canadian Tire (looks like Predator). Bolted in no problem, but when I went to disconnect the oil sensor I couldn't find it. All the videos and images that I could find online show a yellow wire coming out of the...
  4. N

    Removing vs Disconnecting Low Oil Sensor

    My engine will just shut off mid ride on my mini bike. Someone told me it was probably the low oil sensor. Can i just disconnect it or do I have to remove it completely?
  5. Not so mini bike

    5hp I/C oil sensor plate

    What are you guys putting over the hole for the oil sensor when it's removed. I got a engine from a friend and the oil sensor was missing.
  6. Gadget Man

    How sensitive is the Predator oil sensor?

    Hopefully a simple question... On my Predator Hemi build, how sensitive is the oil sensor? I've read that it will shut down simply by riding around corners. I've also read it will shut the engine down when doing wheelies? The wheelie thing I can understand, but shutting down while leaning into...
  7. R

    predator 420

    does anyone have info on low oil sensor bypass ?
  8. jays0n

    Square module connected to low oil sensor

    I've searched and searched and found that I can easily remove the low oil sensor issue by just snipping the wire but I can't seem to find any info on what that small square module does that is connected to the oil sensor. It appears to me that after cutting the sensor wire I should be able to...
  9. DORM

    Oil sensor over sensitive??

    When my clone eng. is running and you lean the bike to the left,footpeg almost touching the ground , the engine shuts off. Is this because the low oil sensor leaves the oil in the crankcase for that short time? If so , how can I disarm the sensor and still use the eng. mounted kill switch?
  10. D

    Predator 212 cc low oil sensor

    Does anyone know where you disconnect the low oil sensor on a Predator 212cc engine? I have one on a buggy and it shuts off in curves, mainly when turning right very fast.:blink:
  11. iatemeself

    more compression by sealing low oil sensor

    is there more compression when you seal the low oil sensor hole? After I sealed it up the pullstart is starting to kick back, starts up real nice though in like half a pull lol
  12. iatemeself

    low oil sensor

    removed the low oil sensor and internal governor, however need to know what size bolt i need in order to plug the hole the low oil sensor came out of... for shits and giggles i tried to start it up without bolting the hole and it didn't start... is this normal, will it start right up when i get...
  13. Bikerscum

    Predator 212 low oil sensor & billet rod?

    Getting ready to do this mod along with others. (Don't have all the parts yet). I read on another site that you have to remove the LOS when using a billet rod. Uhhh... why? Is there a clearance issue? I don't see the harm in leaving it in there otherwise.... just disconnect the wire if need...
  14. G

    low oil sensor

    where is the low oil sensor at on the clones?
  15. 13angryB's

    What size plug for Oil Sensor Removal?

    I have a new 6.5 HF clone, I just de-governed it and removed the low oil level sensor. What size bolt or plug do I need for the hole in the block? ..where the sensor wire went through. I'm at home, & the motor's at work,.. your answer will save me a trip across town to get my motor and...
  16. B

    chinese 6.5 clone oil sensor

    Can someone verify that the easiest way to disable the low oil sensor is to just cut the wire going into the low oil sensor??
  17. D

    need a oil sensor for a 5hp B&s

    need an oil sensor for my 5hp B&s.:grind::censure::weld:
  18. JustEnough

    low oil sensor

    I am trying to run a Champion 6.5hp clone (that I bought at Costco last year for $100) for the first time. It runs for a few seconds on starting fluid, so I know that the ignition is fine. It seems like it is not pulling fuel, even though the gas tank is half full. I always start with the...
Top