setup?

  1. INJUNTOM

    What's the best way to do this wireless internet setup?

    My house has a detached garage that shares a roof and attic space, but has a breezeway in between. Walls are stucco. Inside I have a wireless setup that our home PC uses and we also use for a laptop and cel phones. Problem is that I want to set up a PC in the garage, but already the laptop...
  2. A

    Where can I find this throttle setup?

    Seen this throttle setup while searching around and would like to know where or if this can bought somewhere? I know BMI has the linkage that mounts to the top of the motor but where does the linkage/arms on the carb come from? Briggs Flathead / Raptor Throttle Linkage Kit : Go Karts Parts...
  3. wildbill59

    So what's the best way to adjust this setup?

    Put a new engine on my Sears puddlejumper today. I had to tap and drill the crank, it was a breeze with my drill and tap jigs (thanks ScooterBoy!:thumbsup :) . Anyway, as you can see, the frame has a swingarm suspended with shocks. My problem is getting the chain adjustment right. When I sit on...
  4. texasfabguy

    2 speed jackshaft clutch setup?

    Anybody know what the springs are set up for on lockup? I would like to know what they are for primary and secondary clutches. I want to build my own setup for a built motor,but I would like an idea of what the original setup were.I,m going to use disc clutches instead for better tuning.
  5. 70sVintageTrikes

    Briggs Throttle Setup?

    I saved these pictures awhile back. I was wondering where i can purchase this setup? And yes I even tried the "search" option.
  6. ArcsandSparks

    What's going on with this setup?

    I just finished my Speedway widowmaker with a centrifugal clutch setup. I used the original jackshaft and gearing (JS output/tire side). I am using a HF 6.5 clone stock. So my gearing is a 10 tooth on the clutch-10 tooth JS input-8 tooth JS output-60 tooth on the tire. Now I used 2 separate...
  7. D

    HF 2.5 hp throttle linkage setup?

    Looking for suggestions for connecting a throttle cable to the HF 2.5 hp motor (DB30). The linkage setup on the new motor is totally different from the original motor. Did a web search, found a lot about the 6.5 clone, but not much on the 2.5 hp. Anyone have a good solution? Thanks.
  8. B

    How do I return HF Clone to stock linkage setup?

    I bought a HF clone off craigslist that someone had a DIY linkage setup on. I have all of the original parts to return it to stock but I have no pictures or anything on how this works. From what I've found here by searching is that there is a linkage and spring coming from under the tank that...
  9. twerkd

    whats the best gearing setup?

    building a clone for my db whats a good all around gear ratio ? i mainly ride around my house which is asphalt and i aslo take it to the mountians and trail ride:shrug:
  10. S

    Best gear ratio for clutch and sprocket setup?

    I don't have a jackshaft and my rear tire is 11.5'' O.D front sprocket is 12tooth and rear is 72 tooth good pull but poor top end with a H 35 tec flat head ungoverned. What's the best clutch and how many tooth for the best top end but still pull a 170lb person?:scooter:
  11. colrhino

    double kill switch setup?

    anyone tried this mod? I copied this response out of another thread- contributed by "altered 7151", but I didn't see any follow-ups to his suggestion..... want to know if anyone has had success with this- quoted below: "For a double kill switch you just need to make the circuit go to ground...
  12. 8

    DB30 torque converter setup?

    How would you mount a torque converter to a doodlbug with a 6.5 clone. I probably wont, but i want to know how. Would you HAVE to have a jackshaft? Send me link, pictures and anything that will help.
  13. H

    anywhere to buy a scrub brake setup?

    anybody seen a scrub brake setup for sale? I cant find one on ebay or any of the shops i've found via google. i see disk & drum brake setups, but i need to go as cheap as possible here.
Top