size?

  1. A

    Hawg-Ty rebuild and How to identify chain size?

    Hi folks. I have acquired a few Hawg Ty mini bikes that I plan to get going for the grandkids to ride when they are visiting. They are fairly rough and need some things. They came with honda clone 5.5 engines, one of which has zero compression, both are missing the recoil start and the second...
  2. E

    Wheel size?

    Okay im ordering the parts for my mini bike and the rear tire is still having trouble with air, so i decided to buy a tube if needed. the tire is 12 in diameter (from ground to top of tire) so does that mean i need a 6 inch tube? Its 6 inches from the ground to axle bolt. I just am not sure how...
  3. M

    Header size?

    I've got to build a header for my Predator that is going on a Murray. The Predator only has a free-flow air filter kit and a 36 jet / 140 emulsion tube. So, what size pipe should I use to get this thing to run the best. I will be using a RLV mini 91 muffler. Thanks, Mike
  4. D

    Head stud size?

    Anyone know size of head studs for 6.5 clone?
  5. jeep2003

    west bend size?

    Iv got a west bend without the tag from what i can tell its got a 1 3/4" stroke and 2 1/4" bore. crude measurments. Its a chrome bore and HL88A tilly carb. Anybody know what model it is :shrug: Thanks
  6. catfishman

    crank bolt size?

    could someone tell me the crank bolt size for the predator? apparently my bolt came out somehow, on my predator that is on my db30, and i cant find it. i went to finally start it after sitting all winter, and my throttle was stuck or something, and the bike was possesed for a short time, till i...
  7. M

    Coleman CU200 Chain Size?

    Does anyone know the chain size for this minibike? I broke the masterlink last night and need a new one.
  8. A

    Tire size?

    I'm new to rebuilding old mini bikes. I'm not sure what size tires and rims I need to get for trail riding. I'm not doing any crazy off roady rally stuff, I'm just riding on dirt a lot.
  9. gbabins1

    BC1000 axle size?

    Anybody with a BC1000 that can help me out here? I need the rear axle length. The one I have appears to be a bit short as it does not have enough room to add the chain adjusters :doah:
  10. Andre' Blaze'

    Chain size?

    Hay yall , does any one know the chain size on a arco bushwacker? or tell me how to measure to get the size #35 etc !! Thanks !!!!
  11. I

    smallest 3/4 bore sprocket tooth size?

    I'm finding 10's all day, is that the lowest sprocket size out there for a 35 chain?
  12. rfedodge68

    sprocket size?

    good day everyone. i have a cat eliminator. it has a 68 tooth sprocket on it , to say the least its very worn out. in the OldMiniBikes warehouse there is a sprocket that has the same bore and bolt pattern but it only has 66 teeth. what i need to know is will the lack of two teeth from a 68 to a 66 will...
  13. Mr.GhettoRig

    rupp spoke size?

    anyone know what size spokes rupp used? One of my nipples fell off and I need to order another. :shrug::laugh:
  14. G

    Lil Indian Size?

    Is this Lil Indian the smallest frame size that they make? It measures 14 3/8" from the bottom to the top rail. And is the bracket on the right side for a brake? I have seen them on the left and they use the sprocket as the disc brake but I am not sure on this one?? Any help will be...
  15. old-timer

    Fly wheel nut size?

    Can anyone tell me what size the flywheel nut is on a 5hp Briggs? I need to pick up the right size socket for it. Thanks for the help:thumbsup: Vic
  16. jspec

    3.00 x 10 tire tube size? off a manco puddle jumper

    I tried searching but couldn't come up with much. Would yall happen to know the tube size? The tire is a 3.00 x 10. Thanks!
  17. Rapidrob

    How to determine V-Belt size?

    I have a mini (Heathkit Hilltopper) that has a torque converter for it's drive. My question is,how do you determine what is the correct V-belt size and diameter? How much slack is normal? There is no belt now and the company that made the drive is long gone. Thank you.
  18. Rapidrob

    Hilltopper rear tire size?

    My tire is now a 18x8.50x8 knobby type. How much larger will the Hilltoper frame take on the rear tire? I see 18x9.50x8 have a better tire choice.
  19. aprophet2

    New Tec 3.5 internal threaded shaft size?

    Anyone know what size bolt fits the internal threads inside the shaft of my new Tecumseh powersport 3.5 engine? I don't seem to have anything that fits in my spare bolts and don't know what to grab at the hardware store. THanks!
  20. 45t

    Band brake, correct size?

    Someone aready posted about band brakes and I learned a lot, but I had a question? I'm running a #35 Chain 11 Tooth 5/8" Bore Max Torque clutch that measures 4 3/16" across. Do I order the 4-3/16" Brake band with bracket - Manco Part #1036 (4-3/16" BRAKE BAND W/BRACKET) or the larger 4.5"...
Top