threaded

  1. S

    Honda GX240 1" unkeyed threaded shaft $225 obo

    Starts on first pull, runs excellent and very smooth. located in Fraser, Mi 48026. I can drain it and ship it, but you would have to pay for shipping.
  2. S

    Honda GX240 1" unkeyed threaded shaft $225 obo

    Starts on first pull, runs great and very smooth. I can drain it and ship it, but you will have to pay for shipping. Located in fraser, Michigan 48026
  3. J

    Threaded Axle Rod

    Hey Guys! I'm starting to build a homemade mini bike. And i'm having trouble locating a rear axle (Since i live in Argentina and things are not as easy to find as in America). What i've found is a threaded rod that fits the wheel. It's 1 inch diameter, so pretty big. But it's threaded... do you...
  4. V

    Predator used crank 3/4" keyed & threaded needed !!!

    I only need approx 1 1/2" of the very end of the shaft.
  5. capguncowboy

    1970 Rupp Roadster (and others) jackshaft

    This is a repop that I picked up in a package deal. Very well made and exactly to spec of the originals. 5/8", clutch side is keyed and threaded (nut included), sprocket end is unkeyed and uses a roll pin (not included). $21 shipped from 37618 Grab it quick, or its going on Ebay.
  6. Not so mini bike

    Sale sale sale

    Top 2 seats $20 ea Bottom 2 $25 ea Sebac shocks- $30 pair not stuck but could use new paint. 6" manco whee with Carlisle universal tread tire. Bolt stuck in one of the holes and rim of one bolt hole damaged check photos. Threaded holes on both sides for sprocket...
  7. Not so mini bike

    Air filter adapter?

    That's what it appears to be but the 2 bigger none threaded hole don't fit a clone.
  8. S

    WTB: 5/16 fully threaded 4" bolt

    Where can I find a bolt in this size and fully threaded? Looking for a 4" fully threaded 5/16 bolt. Preferably a 3 1/2 Allen head or a 4" hex head will work too.
  9. Clayon

    Threaded hole in the bottom of my Raptor carb

    Hi guys, I bought a new in box stock Raptor carb and I was looking at it today and noticed that it has a threaded hole in the bottom of the carb, which looks to be for if you are running a stock style Briggs air filter to put the bolt through and screw into. The problem is that I will be using...
  10. T

    Keying a threaded 5/8" shaft?

    I received another 3HP Briggs & Stratton ball bearing motor with a threaded 5/8" shaft and was wondering if I should add a keyway on the shaft. I have used clutches on threaded shafts before but I usually just drill where the set screws will be and then tighten it down. I would rather have...
  11. MB165

    5/8" threaded and keyed jackshaft

    This is a 5/8" keyed and threaded shaft 10.5" long. Its a BMI item and retails for $26.95 5/8" Jackshaft with Washer (02014), www.bmikarts.com : BMI Karts & Supplies : Go Karts Parts : Racing Go Kart Parts : GoKarts : Versailles, Ohio : USA : Indoor Track : Tips $25.00 OBO shipped anywhere...
  12. Mac

    Manco 6" Rim Threaded for sprocket(Ed2Windber)

    Here's a Manco six inch rim that's threaded on the one side to attach a sprocket. Threads are all good, rim has many nicks from years of george3 kind of riding. Bearings may still be usable. Proceeds from this item go to Evil Ed's Windber 2012 fund. $40.00 Delivered to any of the lower 48...
  13. aprophet2

    New Tec 3.5 internal threaded shaft size?

    Anyone know what size bolt fits the internal threads inside the shaft of my new Tecumseh powersport 3.5 engine? I don't seem to have anything that fits in my spare bolts and don't know what to grab at the hardware store. THanks!
  14. bandit 40

    raised threaded PTO cover

    Is there any advantages or dis advantages to having the 4 raised threaded holes on the cover? I have one like this, and some flush with the cover.:shrug: Can the raised boss cover be used on any 5hp application, this one has the dipstick tube. Thanks Mark.
  15. Tinker666

    Non Threaded Crankshaft??

    Has anyone ever drilled/tapped the crankshaft to except a bolt and washer to keep the clutch on??
  16. dirt

    what threaded pipe will fit a tec hs40 exaust port

    hi im looking to make a threaded header. what home depot pipe will fit in my exaust port.? im waiting for some cash for a costom header but till then i want to try different lenths and shapes. i have access to black gas pipe at my pops house will it fit?.i know from my smokin days that copper...
  17. 5

    New Briggs 5hp 5/8" crankshaft Threaded

    I have two of these and they don't have keyways. $40 each or $70 for both. Also have many factory briggs 5hp parts on ebay........:thumbsup:
  18. S

    anyone ever build a mini out of gas pipe and threaded fittings?

    It would be heavy and kinda silly but I am sure it has been done?
Top