Recent content by Biffmini

https://www.ebay.com/itm/CHENG-SHIN-Trail-Tire-and-Tube-410-350-6-8924-354-MINI-BIKE-GO-KART-PNEUMATIC-/263973593307?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

I would go with 4 ply cheng shin

I have an extra black kill switch decal if you want to go with the black one.

Looking very nice!!! Love the shiny wheels & two speed set up.

I would stick with original! Never tried cheapo

Seems to me you have it right.

I have some PM me

Good stuff!!

While I was dialing in the final drive. I had a clearance issue with the 10 tooth out sprocket. After a search I was able to find one with no clearance problems.

https://youtube.com/shorts/OgAHYIenISs?feature=share

I have tacked on the tensioner & reinstalled swing arm to confirm Placement. Alls good, works like a charm.

I now have a working hydraulic front brake & cut out my mud guard out of black acrylic sheet. I'm now In the process of moving backwards, just when I thought I was done with the rear end. I've decided to add a chain tensioner to swing arm to make up for the run out in the rear wheel. I've...

Make your own. Flanges aren't too tough to fab. I had a pro bend tube & weld 30% Then had it zinc plated.

30 w engine oil 1st to engage LG one way sprocket

Very Nice!!!!!