Recent content by desert rat

Now that right there is funny.

It's good to see this reposted. I have been posting it for years and it should be a sticky post some where. I will add one thing, if it a pump make sure it's on it's own hose. If not you will need to pump off the first 1 to 1.5 gallons before you get tru e free fuel. Talking about fuel my wife...

I will be in Kansas for the next month. I will have 35' x 102" enclosed empty coming back to California. My trailer is available on the run back to get more personal stuff going out of California. Just an offer for friends. I have next to no internet at the ranch in Kansas so get it done soon...

Home made

Check you drive system and make sure you have not lost one of the little square keys that go in between the shafts and the sprockets

You can make your own. https://www.mcmaster.com/products/one-way-bearings/

Punch the top thread just a bit to turn the set screw into a locking screw, Do this with the alen wrench in place so you do not deform the wrench hole. This will cause added resistance to the thread area just like a lock nut, OR https://www.mcmaster.com/products/set-screws/hollow-lock-set-screws-5/

Depends on your stage of the illness. I was in stage 4 at one point and went from LA Cal. to Walla Walla Washington on Christmas day for these. I'm happy I did it today. One running two waiting until I get them to the ranch...

https://www.partzilla.com/catalog/honda/motorcycle/models-with-no-year/z50ak2-a/steering-stem all of your parts are here https://www.partzilla.com/catalog/honda/motorcycle/models-with-no-year/z50ak2-a This is who I use on all of my big bikes, Race bikes and street bikes...

Also check that you are not bottoming out the threads of the bolt . If you are close add a washer to the stack.

https://www.hemmings.com/stories/2012/10/18/tech-101-zinc-in-oil-and-its-effects-on-older-engines

https://www.txdmv.gov/motorists/assembled-vehicles https://www.txdmv.gov/motorists/register-your-vehicle/texassure-insurance-verification

nun

It was an O-ring. I git it