ruppking's latest activity
-
Rruppking replied to the thread WANTED RUPP clutch drum and sprocket 11 tooth.Found one. Thanks for looking.
-
Rruppking replied to the thread HM80 only runs with choke on.Make sure that your throttle butterfly plate is adjusted correctly. There is a line stamped in it it should be pointed up. If the...
-
RWANTED RUPP clutch drum and sprocket 11 tooth, #35 chain, part # 13917 for my 1970 Chopper project.
-
Rruppking replied to the thread Rupp..I believe.It is a 1971 Rupp Roadster/2. Engine is not correct. It should have a Tecumseh HS40 4hp engine with lighting coil to power lights.
-
Rruppking replied to the thread 1972 MOTO-SKEETER 650 info wanted.
-
-
Rruppking replied to the thread 1972 MOTO-SKEETER 650 info wanted.The 1972 only year" BSE engine model # ECO9M-A is a 96cc 6-1/2 hp engine is very different than the 98cc engine. It has an aluminum...
-
RThis might help. https://oldminibikes.com/forum/index.php?threads/is-a-jacobsen-4hp-98cc-2-stroke-worth-anything.172756/ And here...
-
RLooking for information, wiring diagram or parts catalog or where to get ignition parts for the "1972 only year" BSE engine model #...
-
Rruppking replied to the thread Ricein west bend 820 rail road tie chop saw conversion.Racine railroad chop saw Model #82032. Clockwise rotation.
-
Rhttp://blackwidowmotorsports.net/_33301t_slanted_intake_manifold.html ^^^Click Here^^^
-
Rruppking replied to the thread Can anyone help me find a belt for this mini bike.That does not use a torque converter belt. That is a cogged belt set up. You should be able to get one from an auto parts store. You...
-
RBlackwidowmotorsports.net
-
Rruppking replied to the thread Seat and belt questions.We have them in stock at Blackwidowmotorsports.net http://blackwidowmotorsports.net/_15300f_seat_foam_1970_75.html...
-
RI am looking for info on a MOTO-SKEETER 650 minibike. It has the BSE 650 2 cycle engine in it and has intermittent spark. Spark plug and...
-
