Skipp's latest activity

Mini Bike & Go-Kart Parts

  • Skipp
    Skipp replied to the thread Sears Roper - Original engine?.
    Of its like mine it’s a 5/8” shaft with spacers on it...on mine the spacer seperates the driver and the sprocket....yours appears to...
  • Skipp
    I swapped out the front mounted tank today for a cylindrical tank because I wasn’t getting enough gas flow. It looks better too. Next I...
  • Skipp
    Skipp posted the thread Need a set of bonanza wheels in WANTED.
    Preferably Go Power but kidney bean will work...
  • Skipp
    Skipp replied to the thread TEC H50-65286H Flywheel.
    get one of these...and as a wise man once told me....just because you have good spark doesn’t mean you have good spark at the correct...
    • 20EE4E27-FE74-459D-8AA4-2515DFD969C7.jpg
  • Skipp
    Skipp replied to the thread TEC H50-65286H Flywheel.
    When you say cover you mean shroud?..,when setting the points I turn the crank...when setting the timing...(btdc) I turn the crank....I...
  • Skipp
    I'll watch the videos. If it's that old they may be using an H50 in class. I did see one with a lab coat. it might of been the one...
  • Skipp
    Factory timing video is the BEST! I enjoyed watching it just for the "set" and 70s vibe.
  • Skipp
    Skipp replied to the thread TEC H50-65286H Flywheel.
    You know the best thing I ever did before I tore apart a Tecumseh motor was watch a stupid you tube video....well several....and by the...
  • Skipp
    Skipp replied to the thread H50 flywheel key.
    No pic....but the narrower end (little step) goes towards the motor....
  • Skipp
    Skipp replied to the thread Rupp hs40.....
    No longer available
  • Skipp
    Just a heads up....ive purchased 4 hs40 thin ring piston assemblies (35544a) two of them have been wrong....two have been the 2-5/8” as...
  • Skipp
    Just finished up my Lil Indian build. I went with a freshly built West Bend 510 with a custom fabricated exhaust pipe. I also...
  • Skipp
    Skipp replied to the thread HAPPY BIRTHDAY Robert C..
    Happy birthday Robert!!
  • Skipp
    Skipp replied to the thread Rupp hs40.....
    The primary stainless hardware fell through...but stainless head bolts
    • 196D3580-F5FD-4452-B493-8609A26F8403.jpeg
    • DB487FE6-F873-479B-82C0-875275A92DF2.jpeg
    • C539BB1C-5FA0-4971-9F29-C3D9EF1EAFF3.jpeg
    • 71BBD962-8B19-471C-86C2-27D6CEE1FB17.jpeg
    • 0D136909-62C8-4C38-BB3F-0748BA1485BC.jpeg
  • Skipp
    Skipp replied to the thread coming soon..........
    Wish I could “like” it more than once! Awesome just awesome!
Top