Search results

This makes sense and will try it out, will let you know how it goes! Thanks

Hello there. I have a db30s, and I have a problem with my seat one of my nuts in my seat came loose and came out of the seat. Now I cant bolt the seat down at the front. Is there any way I can get the bolt back in there and secured to mount the seat again? Thanks

Hey guys, I recently put a 30 series TC on by db30, and just have a question about it. Acceleration is great and top speed is good too, the only thing is, when I release the gas, with no brakes, the Torque converter feels like it I am applying brakes, similar to just downshifting in a car. Im...

Hey guys, i recently put an upgraded air filter, new main jet, and exhaust on my 6.5hp engine on my DB30. I also bought a torque converter and strapped it on! The only thing is, with the 72 tooth (i have a 12 tooth sprocket on the TC) I pop a wheelie any time starting out, even 1/4 throttle...

Hey everyone, I bought this torque converter,,, Torque Converter Kit CVT 3 4" for 40 41 or 35 Gear No Returns See Listing | eBay Here is the description Go Kart Torque Converter, #40/41 or #35 Gear included. Driver Unit is 3/4" Bore- Replaces TAV 2 and Manco 5957, Comet 219552, Yerf Dog...

Hey there. I recently bought a main jet/emulsion tube, header, and air filter from OldMiniBikes! I out the adapter on just like you have it, except when I the gas valve on, the gas leaks up the carb bowl, and out through the adapter! Im not sure what is wrong, and I need help! I haven't put the air...

Hey everyone, Im not sure how to measure a TC to determine which belt to choose, so hopefully you guys can help me out! This is the TC i bought,.... Torque Converter Kit CVT 3 4" for 40 41 or 35 Gear No Returns See Listing | eBay and I want to buy a good belt from one of these. Which...

Hey everyone. I just installed a new upgraded air filter from OldMiniBikes,GX200/Clone Air Filter Kit The problem is, the gas overflows into the filter from the carb. What is the problem, and how do I fix it?

Is the driver the part with the spring? if so, what do you mean take it apart? I see everyone just put it right on

Yeah, ill post pictures of my alignment soon, the bike is at my friend house. Also, when I was putting on my belt, it seemed tough, some videos ive watched people have just slid them on no effort. Here is an example, go to 4:50 minutes... That's how hard it was to put on the belt. Also, how can...

I will be posting pictures of the driven today. But can anyone tell me what belt to buy with this description? The link is also at the bottom, thanks Go Kart Torque Converter, #40/41 or #35 Gear included. Driver Unit is 3/4" Bore- Replaces TAV 2 and Manco 5957, Comet 219552, Yerf Dog Q43201W...

Okay, What different spring do I buy? I have a red one right now. Also, literally 5 minutes of riding, my belt fell apart. The string between the two seams came out. Could this be a crappy belt, or an improper setup? Can anyone send me a link of how to put it on properly?

Hey everyone, I a knockoff tav-2 for my 6.5hp db30. Honestly, as soon as I touch the throttle a little more than 1/4 in of a turn, it pulls my front end up like its going out of style. Is there anyway to reduce the torque, even just by a little bit? Thanks a bunch

except my tire is literally flat, imagine someone squished it completely. A normal tire is like this () While mine is like this ll

I buy my tires from Royal distribution, the duro ones, fit well on the Db30. The only problem is they ship them completely flat, they squish them down, and is almost impossible to open them up, let alone get them on the tire. I got it onto the rim, but I cant seat it because it just flattens...

Hey there, do you have any stock sprockets left? also, when you say the mechanical disc brake, are you talking about the actual rotor or the brake caliper? Lastly, any idea for shipping cost from you to Canada, Ontario, toronto?

Hello everyone. I have a 6.5hp powerfist engine, and have a little difficulty starting the bike. It seems the pull cord gets stuck about half way of pulling it. Now, I can pull the cord past that spot easily, but it seems odd that there is a spot of resistance while pulling it. When I first got...

Sounds good, Should I oil it with my engine oil or what?

Sounds good for the input, any idea where I would be able to find a "Spring loaded jobbie"? Ive never heard of it before and have no idea what it is. And same goes for a solid shaft clutch, not sure what the difference is between the brass bushing but I will give it a shot. Any idea where I can...

Not sure what my gear ratio is, but here is my engine.... 6.5 HP 196cc OHV Gas Engine | Princess Auto