link in post 5 does not work
anyone know of a replacement carb that is right for my motor. I see some for under $20 but don't know if they work for my motor
I have a Tecumseh motor for my pressure washer and a factory carb was about $16 which I found to be cheaper in parts and time rebuilding...
Model: 91202
Type: 0017 01
Code: 960416FA
I BELIEVE MY CARB IS A FIXED JET. PULSA-JET
IDK model # but did find my B&S service manual and in section 3, CARB, it shows pics and the Pulsa Jet appears to be what I have
I need to know what model # the carb is to get a rebuild kit or buy a new one
ran some B12 fuel system/carb cleaner through and open/closed screw on carb and all is good now. Picked up a tube at Tractor Supply to fix the front flat and ran the bike several times around the neighborhood
Have the 3.5 B&S shown in my pics. Must be 20 years old now. I don't have any reference (owners manual) for it but the motor won't idle on its own now. Yeah its been in storage but was run about 6 months ago and always started easily. I did swap out gas and can keep it running WOT but very low...
I buy tires & tubes at Harbor but the "knobby" ones, not those "complete" tire/hub combos for hand trucks
The tires alone are not plastic feeling or looking...actually the tires on my avatar pic are from HF
OP
IDK how much slop you have but as suggested you can use sizing material aka "shim stock" It comes is various thickness. Some old school hardware store may have some. If just slightly enlarged hole (read bearing fits but will slip in hole) green Loc-Tite can also work
OP
There are guys on this forum with fabrication (welding/machining) you will need to build a 60 MPH mini bike. Once you start cutting the frame you can make it so it will hold about any engine you chose. Gearing, likely with a jack shaft, tire size and what RPM the motor will make can be...
OP
This is a great site for info. As mentioned OldMiniBikes.com will have a bunch of stuff to chose from including the kit noted. You can also check out Classifieds for parts, a roller or just a frame and "roll your own"
I just finished a refresh on a 69 CAT I have had for many years that was left in...
I hope the lost picture, can't post picture thing gets sorted out. I can't edit any of my posts to add them back if posting pics started working again.
I could post a duplicate thread with pics but can't post in new or old threads.
I know this issue is being worked on. Hope what is lost can be...
yeah I am in the WTF did my pictures go group. Ironically pictures posted by others in my build thread remain on the thread but mine are gone. IDK if others viewing my thread can see the pics. view count keeps going up but no posts so IDK if they are seeing pics or not
hopefully OldMiniBikes can resolve
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.