Search results

Place by me has these mini speedway bikes for kids they are really cool

Lol I guess it depends on the gearing and tire size how much power is actually going through it. The only time I used that style it was on a gokart with big tires and a 175cc yamaha 2 stroke it lasted about one trip around the yard

I think that style is a foote but im not sure. The casing is only cast aluminum so the peerless are stronger but its well supported so it shouldnt blow up unless you put crazy power through it.

I have one Kick stand available it is 1" longer than stock 36$ shipped. And two seat patterns for 22$ each shipped. The pattern has the 3 part vinyl, the wood seat base and dimensions for the shock mount. paypal

.

Try it and find out. Im sure we would all like to be proven wrong. I think it will always move and loosen up throwing off your chain. Not going to kill you or anything unless you like to go fast. The problem is all thread is weak and the aluminum plates will bend around the tube and the tube...

Traded a vw tiguan for this 67 mg.

""

Ant-Seize is abrasive it should not be used as a lubricant

Poor rokon!

Nice ramrods make great customs and the full suspension is great. Those rims are awesome what are they from?

Decals turned out great. Second test ride today works pretty good had a fuel leak pulled the tank off to fix. I guess I need to tighten the chain aswell.

Thanks guys the problem with the big red is they have shaft drive so I dont know how you would deal with that not worth the extra work to figure that out.

Thats what I was going for. Alot of the conversions look off. Either ride height or the swingarm is too long or janky fenders all make them look a bit not factory built. So I did the best I could to make it look right. It handles like you would expect. Like a trike lol alot like a super bronc I...

I made the rear fender out of steel I used my english wheel to give it some curve then pie cutted the edges and made little covers for the frame ends. The lip is also folded over so its not sharp. I just screwed it onto the bottom of the seat. The front part i made a piece of rubbery plastic so...

Thanks Robert its certainly been a while since iv built anything this involved. Its nice to know I can still do it!

So the swingarm went together well and I had some shocks that had a suitable spring rate. I used the original trike rear sprocket and made the little jackshaft with some old front sprockets which gears it down a little by a few teeth. Then made muffler on the side and a shield for it. I used...

Yes they did make kits called the "Missile kit" they still make them for the 250r I think. but most built now are custom

The headlights I ended up hanging from the top rather than coming up with lower mounts off the forks. I wanted the screened look so I used some metal screen that i stuck in there. I drilled 4 holes in the rubber buckets and left the screen with 4 sides poking out to stick in the holes so the...

Starting with a trashed Kawasaki ATC200 trike. Many things were missing or bad. I always wanted to build a fat bike out of a trike this was the almost perfect opportunity. The plastics were gone the cdi was gone. The back axle had a differential that was grenaded. No seat or anything. First...