Search results

Baja Minibike in very good condition. Strong smooth running 5.5 hp Jiangdong (clone) This bike has very low usage. Original tires are like new, it has been sitting. I cleaned it up, went thru the carb and tank, new throttle. Its good to go. The bike can easily be modded to the perfect Drag...

323.702.2120 / Koollee_909@yahoo.com I do not have the spacer, or band, only the hub. 3 hole, fits Azusa wheel, etc. will sell $15 ... good condition or trade for Hub like this with the flange, to mount 6 hole sprockets to. Need one of those (in last pic with blue frame) or a...

finally willing to sell my unfinished "Rx7 bike" $150 (Riverside county, so Cal 92553) 323.702.2120 / Koollee_909@yahoo.com it needs: the engine plate and seat mount/strips welded in, also a triple clamp (for fork/handlebars... that was removed but I cant ID what mini or trail bike it...

Must sell my minibike project, my loss. Must sell all, no part-out. 6.5 clone engine, Azusa tri-star wheels (6" rear, 5" front) 54tooth, 2piece sprocket, new drum brake set up. Clutch, chain, throttle, kill switch $175 Local pickup is more convenient. (323)632-4731 If interested...

Minibike project that i didnt get to finish, must sell Asking $200 obo Has alot of goodies on it. Azusa rims (front 5", rear 6") New 54tooth sprocket, new drum brake setup. Front tire I bought was a lil taller than expected Engine is a 6.5 Honda clone, runs great (missing recoil, Ive...

Selling my roller (frame, wheels) Asking $100 or best offer (negotiable) Needs the engine plate and seat brackets welded in, a top triple tree (made or replaced) as well as the rest of the mechanical parts. Has front shocks that work well. The wheels have disc rotors. Wheels are from a...

$10 for this engine block. Honda GX110 (4hp, i think) with 3/4" crank shaft/pto I got this engine like this. It may run with the parts put back on it, not sure tho Missing: Carb, air filter, ignition coil, spark plug, starter recoil Riverside county (Moreno valley) CA 92553 Local pickup...

Frame, wheels, engine, engine plate (not in yet) Has front, rear shocks. Front disc brakes are working, rear needs the caliper mounted. Caliper included.. may include a few more parts also. Engine is a 6hp Mitsubishi GT600. Hemi combustion chamber (Hemi head) It runs great, 3/4"...

Carb from a newer OHV Tecumseh engine. Not sure if 5, 6, or 6.5 hp. It recently was given to me but I didnt need it. Its missing the upper half of the intake, and air cleaner. It is kinda dirty outside. It may work but I cant gaurantee. It may need a solvent cleaning, and blow...

Must sell my minibike project. Hate to... but must sell Asking $180 Needs handlebars, 2 cables, seat, and assembly. Geared for speed. Stock 6.5hp engine (great cond) 12T clutch, chain, new 54 tooth 2 piece sprocket, new drum brakes. Offset/Staggered Azusa tri spoke rims 6" rear, 5"...

Heavy duty, un-used new old stock forks 1-1/4" steel tubing. Can bolt on a double neck set up for your handle bars, or I can weld on or fabricate the bars for little extra. Measures: 22-7/8" top to bottom, 8.5" between triple trees (for up to 8.5" tall neck. Can install a short spring...

This is an old sprocket, in nice condition. The center hole/bore is 1-1/2" asking $15 Shipping Ok. Check, Money order or PayPal Ok call for faster response. try me on both numbers Lee (951)780-7276 / (323)632-4731 Koollee_909@yahoo.com

This is a very straight king o lawn frame only. Someone has added the flat backbone piece up top. Theyre made with out any backbone (this Model) Paypal, Credit Card / Shipping OK. Local pickup is really OK : ) (951)780-7276 Lee (323)632-4731 no text

this is a 4" rim, 3.5 wide. its new, with bearings. Only 20$ Pick up in So.Cal (Riverside area) Will ship Paypal, Credit card/atm Ok. Fast response... CALL (323)632-4731 Lee (951)780-7276

Cheeftah BC1000 frame, custom engine plate, and everything else. Restored bike, adjustable forks, Lots of new parts. Fresh 6.5 engine, premium exhaust, port matched with expansion chamber. Gas tank is not repainted, nor is the exh. expansion chamber. Has new sprocket, chain and tire...

Cheeftah BC1000, custom restored.. so easy to complete. Has fresh 6.5 clone, new engine plate, 41 chain, and sprocket (high speed gearing) Great disk brake recently added, slotted rotor. Adjustable billet and chrome front end, adjustable bars, front end pegs. Nice lookin bike in...

Cheeftah BC1000 minibike. Restored, customized drag style, high speed gearing. 6.5horse OHV, rebuilt carb. Also includes parts not shown. Color is "Expresso" brown, black trim. Has bearings in the neck, adjustable front end (billet and chrome), adjustable handlebars. Bike has been...

I believe this is a Cheeftah BC1000 frame originally. Ive done alot of work to it , it is very straight. The engine is a 6.5 Jaindong, or Honda copy, carb is rebuilt (not pictured) Engine is virgin stock. Bike is geared for a good top end (60 or better depending on engine power) front axle is...

want the 2 piece aluminum sprocket 53 to 56 teeth # 35 chain, fits the 6 hole drum or hub also want 1 to 3 seats 5" slick or rounded tread. koollee_909@yahoo.com email me, i dont use this site too often.

$45 or trade for 2 piece 53-56 tooth#35 sprocket plus cash. Or sprocket and rounded tread or slick 5" tire (not a big big one) avg size King O Lawn minibike frame. Very straight tho someone has added a steel plate/support, it can be cut/removed easily. The steel tubing is stronger than...