Search results

Thank you I'll try them.

Hey Guys, I picked up a Kgro Powerpro 16hp 6 speed 42" deck (1997 made by MTD for Kmart) Does any one have one of these? My problem is: it cuts terribly uneven the Left side of the deck sits close to the ground(if Not Rubbing) at any height adjustment below six. I'm sure this can be adjusted...

I have every thing that was attached to the cable , It broke at the twist grip end ( where it attached in side the grip.)

I have every thing you mentioned.

I need a throttle cable for a Sachs Soxonette 50, It is on a Arctic Cat SSSCat. I believe it is the original throttle assembly also. or info on where to get one. If any one has a used one or (new) or know where to get one please let me know.

Can anyone tell me where I can find a throttle cable for this ( part number) or get a comparable replacement. It is on a Artic Cat SSSCat

Can any one tell me how to replace the throttle cable on the Saxonnette 50 or have an exploded diagram of the carb? That has the barrel slide type throttle and I don't want to tear that apart without knowing how to do it. Also does it require a specific cable and where would I get one? any help...

Thanks for the info, I have no idea whats supposed to be on there. The light was gone when I bought the bike.

Looking for an Original Head light (complete) or compatible replacement/aftermarket. Also need a kill switch.

Thank you I didnt see the attachment the first time I looked. I do appreciate all the help.

How much does it take? Do you put it in through the bolt hole on top.?

I asked in the two cycle section but I ask here also: Any one know what kind of oil and how much goes in the case. Also where does it go in. Thanks in advance.

Hi guys, can any of you Sachs guys tell me what kind of oil and how much goes in the case? This is the Saxonette 50 two speed on an Artic Cat SSS. Also does it go in through the bolt on the top of the case? Any help is appreciated.

Sorry, the member wishes to remain anonymous.

A new magnetron coil arrived today, I put it on (I ended up gapping at .020) and it works great. I would like to publicly thank the OldMiniBikes member who donated the coil to me (including shipping). I wasn't expecting that and am very grateful of their generosity . Thanks again to all who replied to...

I tried the buissnes card and got the same result, a very weak current. I'll have to get a coil. CarPlayLB If your willing to give up one of your spares please PM me the details. Thanks W/D

Thanks for the info guys, I'll try the buisness card gap and if that doesnt work I'll probably get a new coil.

Hi guys Currently I cant throw a spark I can feel a small current if I touch the lead while pulling but I cant get a spark to jump. I have cleaned the flywheel and bottom of the legs, I have changed the condenser ,cleaned and set the point but still nothing. I know the coil contact leg gap to...