Search results

Currently have a 12.5 pilot I was recommended but I'm guessing it's making it lean out while idling hence the high idle. I have a 95 main, ordered both a 17.5 pilot to see if it brings down the idle and a #130 main jet. Been turning the air screw on the bottom about 1 to 1 1/2 turns out. Have...

if its not a fuel shortage then what would it be? it starts up with the enrichment device on but it has a very high consistent idle, and i cant get it to idle low with it off, is it getting too much air? i dont think its a chinese knockoff, all of the parts are from Iskys website and i got it...

Hey guys im finishing up my go kart build and have it all together, but this thing is almost impossible to start. The valve lash is good, but i dont think its getting enough fuel when pulling the cord or something. I had it running for the first time today for a solid 45 seconds with the...

Thanks for the input guys! Its been pouring rain where im at unfortunately, hopefully itll clear up and ill get a chance to get the beast started. I ordered a 130 main jet for the mikuni because ole told me it may be running too lean with the stock in there. I'll also check my lash about 10...

Hey! I just rebuilt my non-hemi predator 212cc motor after running it for a few months after removing the governor and adding bigger jets/exhaust. I wanted to really build it this time so i cracked open the case and added these parts: Mod 2 cheater cam 26lb valve springs Chromoly push rods...