Search results

March 9th we head back to the twin laned black top for march mini madness at the Barona drag strip....Rules and event times to follow this week....stay tuned....:thumbsup:

BARONA 1/8th MILE MINIBIKE DRAGS SATURDAY AUGUST 25th 2012 Open to all minibikes, from all over... RULES ARE AS FOLLOWS. Riders Must: Wear protective gear, Helmets, long pants,(no shorts), jacket of some sort for protection, high top shoes, or boots, and gloves are required...

Hey everybody, this is a friend and customer of mine, go to the link and vote for him. He is the owner of Delta Cam, big Mitsubishi and Subaru cam maker.... Vote for him guys..... OctaneAcademy.com

Fully Modded gx390, stock stroke and bore, custom Arias piston, Arc Billet Rod (New), New Honda Crank Balanced intenally, ARC 3hp 390 flywheel @ 2.8lbs with adjustable timing, Billet adjustable Isky Camshaft, Welded Honda Head, 27cc chamber, Fully Ported, 6mm stem Titanium Valves, 1.550/1.350...

Nitro Drew was blessed with a new baby girl sunday, she came in at 7lbs 15oz, and like McDonalds like her daddy.... Congrats Drew from all your racing buddies.....JD :thumbsup:

The works have begun. Billet Rod, Lightened Billet Flywheel, flat top piston, Real Honda ZH8-14 head Milled and Ported, custom length big valves, custom bronze valve guides, dual Isky springs, billet retainers, Custom Isky cam, Billet Hunter Rockers. big mikuni on Alky.... The ol mans gonna...

Setup for gas, has alcohol Needle to go with it and triple stacks for alky. Billet intake to fix a gx200. Blueprinted By EC. 135.00 obo Shipped. Perfect Condition. Barley used.....

GX200 22cc Clone head, Fully Ported and polished, Milled .065 thou, seats opened up with a 27mm intake, and a 25mm exhaust. Spring pockets cut, complete with SI Valves, 26lb springs, SI Retainers, and Suzuki Hardened locks....Head is fresh, doing away with all my small block stuff.....125.00...

Just Recieved my New Temecula Bobs Drag frame, Top notch piece, Starting tonight on my frame bracing and other things like tank mounts rear caliper mount and so on. will be updating with pics till done....

Some Quick Test passes on the new combo from this weekend, bout 83mph in the 1/8th and 8520 RPM...... YouTube - JD Testing His New Mods

My Gx390 DragMini first runs, GX390 has a carb, header, billet rod and flywheel. All else is Stock. Cam and springs wouldnt allow it to run past the 1/8th mile. New head, cam and carb being added this week.... Me On it YouTube - JD Making a few Passes on the Drag Mini Baby Making a...

This Tilly started as a 25.5mm venturi, with a 28mm butterfly in the rear. Now it is a 27.5mm venturi with a 30mm butterfly. I made the butterfly and did the venturi and blending all by hand, the rear was bored on a mill.....:thumbsup:

The Boneshaker and I fired up lil Doms new motor, sounded great, the first motor that made the 90mph pass was a std deck hight motor with the piston down in the hole .057 thou. New motor has a zero deck hight and is Oringed, and sports a copper gasket. fully machined crank, knife edged counter...

last weekend we clocked 79mph then the motor fell off to 76mph and would not run any harder. found out the intake lobe on the stock cam had given in to the spring pressure.... during the week i dropped in a Custom Tim Isky Hardfaced custom cam, upped the spring tension and put a 2mm bigger carb...

last weekend we clocked 79mph then the motor fell off to 76mph and would not run any harder. found out the intake lobe on the stock cam had given in to the spring pressure.... during the week i dropped in a Custom Tim Isky Hardfaced custom cam, upped the spring tension and put a 2mm bigger carb...

I found this after looking up the race location, if they wanted to :ban: him, i would think that they would have the (balls) to atleast put it where he would see it.... They put it at the top and bottom of the page, just nowhere he would see it......:confused: Seems they took discrimination...

YouTube - The Boneshakers Drag Motor. YouTube - The BoneShakers Drag Motor Thanks to Charles of ICE HOUSE PERFORMANCE.:thumbsup::thumbsup:

This is the video of our last race which we clearly dominated, with a police escort.:thumbsup: http://www.youtube.com/watch?v=oylA_zkoN6Q

In Car Video, http://www.youtube.com/watch?v=3zSJAkdEDgo Chase Cam From Behind, http://www.youtube.com/watch?v=zVJCjOemDEU I am Ok, punture wound to my ankle and Chipped ankle bone, some stiches in my ankle, and a bent up race car. 3 weeks till next race, we came out of that last...

i NEED A FENDER FOR A 20/50/10 REAR TIRE, ANYONE HAVE ONE OR NOW WHERE TO GET ONE ????????:confused::confused::confused: