Search results

  1. jeffdubb8

    WTB Broncco Diablo

    The bike is 90% together...I just need to dig out a motor...otherwise it's pretty much all there...
  2. jeffdubb8

    WTB Broncco Diablo

    Sure, I'd be willing to sell it...like I said, I took off the 75cc engine, but I do have some spare 50cc Minarelli's laying around somewhere...I have to pull them out of storage though...The bike is actually pretty decent...I just prefer the smaller 7 inch wheel TX series is all.
  3. jeffdubb8

    WTB Broncco Diablo

    I have the green bike in the picture above that I'd be willing to let go...I am in AZ though...I took off the 75cc for another project, but I have a 50cc Minarelli P4 that could be directly swapped in. The Diablo had the 75cc and the Warrior had the 50cc...same bike otherwise. It's a fairly nice...
  4. jeffdubb8

    headlight trim ring for Fanta Broncco TX-1

    This one should fit as well. The Broncco's came with two different ones for no particular reason... http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&toolid=10001&campid=5335845805&icep_item=153615347180...
  5. jeffdubb8

    For sale Bronco mini bike

    Got more pics by chance?
  6. jeffdubb8

    Broncco TX2 Need hand brake lever, handle bars,clamps.

    I'd like a winning lottery ticket. On a serious note...the seat will be VERY hard to find in good condition. In fact, most of those parts are hard to find. Keep looking on OldMiniBikes, CL and Ebay...eventually most of them will surface...the seat will be tough though.
  7. jeffdubb8

    Minarelli P4 parts 1970 Broncco TX6

    A simple Ebay search comes up with a lot... ;-) https://www.ebay.com/i/352620341381?chn=ps If you google Minarelli P4 Sport you'll get even more info...
  8. jeffdubb8

    headlight trim ring for Fanta Broncco TX-1

    I think this is the correct one...they used two different kinds...but they are 105mm...and I'm fairly sure this one will fit. http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&toolid=10001&campid=5335845805&icep_item=233187382272
  9. jeffdubb8

    headlight trim ring for Fanta Broncco TX-1

    Tough part to find by itself. You'll have better luck looking for the entire headlight. Try Ebay, CL etc...Broncco parts are getting harder to find these days...
  10. jeffdubb8

    Broncco Gas Cap

    Nice TX-2...if you ever want to sell that seat...please let me know (I'm serious)...Here is a link to a fantic gas cap in Italy. YES, the shipping is VERY expensive...so perhaps you can buy the whole tank for $25...and then ONLY have him ship you the gas cap for $10 or so...Just an idea...
  11. jeffdubb8

    bronco tx

    Interested in selling the chain guard?
  12. jeffdubb8

    broncco

    In the Broncco world, the Lively Lime Gold and the Fantasik Green are COMPLETELY different colors. Lime Gold was a factory TX-6 color, and IMHO is the BEST color Broncco ever made. It's truly awesome. It's a lot more yellowly gold than green, in fact there is almost no green in that color.
  13. jeffdubb8

    broncco

    If you're trying to do a 'perfect' NOS restoration then yes because the TX-6 never came in Green. BUT, if you're just going to restore is 'nicely' but not perfectly, then it won't matter too much I don't think, BUT it's all subjective.
  14. jeffdubb8

    broncco

    What are you looking for?
  15. jeffdubb8

    1970 Fantic Motors Broncco TX-6

    What info are you looking for? They are 50cc 2 stroke Motori Minarelli Engines Desginated "P4S"...4 speed tranny. They were built from 1969 until 1972. There are several variations between the US and Europe etc. They were street legal as well if you have the title. They are fun little bikes but...
  16. jeffdubb8

    Benelli Volcano

    Lil pricey IMHO...even for a Volcano with a title. Decent bike though... https://www.ebay.com/itm/1971-Benelli-Volcano/263964848628?hash=item3d7587f1f4:g:j8oAAOSwFYZbr9Yt
  17. jeffdubb8

    Broncco TX1 and MDT Trailhorse customs

    Nice Click Bait...But I prefer mine ;-)
  18. jeffdubb8

    ISO SC-93 Pirelli Tires

    There's an NOS on Ebay right now for $129.99. Lil pricey...but they are hard to come by. https://www.ebay.com/itm/Vintage-NOS-Pirelli-3-50-7-Tire-RARE-Benelli-Broncco-Fantic-Minibike-Scooter/273383202829?hash=item3fa6e8a00d:g:AwQAAOSwcB5ZF2wk...
  19. jeffdubb8

    minarelli engine

    You're looking for a 50cc Minarelli P4? There are a couple different ones, especially as it relates to the side engine cover etc. Is there a specific one you are looking for? I might have one, but I have to unpack some stuff. Here are some on Ebay Italy...
  20. jeffdubb8

    Restoring a Tecumseh - another way

    I love powder coating and use it ALL the time...in fact many of my mini bike frames are powder coated...but its much tougher for an engine due to the process and thickness as well, esp for the fins/block. Plus it's harder to match the block color after the shroud has been powder coated. I try to...
Top