14cc

I know that the hf 6.5 is on sale for $99 right now so i'm getting a second one to have some fun. I am already currently building one and going in the higher displacement and higher compression direction. With this new one i was thinking of some other things and wanted to know a few things...

I am looking into a new head and valvetrain parts. I have a modified clone with these mods: Billet fw and rod 18lb springs 22mm mikuni split retainers and keepers flat top piston header .265 cam I am looking for more power. which head would work best? this is the first build that i am...

i put a 14cc gx160 head on my blue clone, it ran good for a little bit, but within a day or so after it started to not work to well. it would start and still go but wouldn't top out nearly as fast as it did the day before, and on the following day the motor would hardly start and if it did...

i have a clone with these mods: 2 stage header, uni filter, 22mm mikuni w/ fuel pump, 18lb springs, billet fw and rod, .265 cam, retainer and keeper set, flat top piston. I would like to step up the power one more step. Would a "bare" 14cc head be very much of an upgrade? Im only asking...

I am looking for a honda 14cc stock head. If you have one for sale pm me with price please.

I am looking for a bare Honda 14cc head. PM me please.

Honda GX160 Parts 1. GX160 head- $45 shipped. It will come complete with the springs, rockers and the push rods. This head is on a running engine. 2. Block- $35 shipped (I have 2 blocks) 3. Cam and rod $15 shipped (2sets) Gx160 clone parts 4. Clone head $10 shipped 5. Clone block...

14cc honda head 28.5mm ss intake with OS seat 25mm ss exhaust Dual springs Multi angle valve job Milled Custom matched port intake. Polished $260 Pictures here: Image hosting, free photo sharing & video sharing at Photobucket

This is a good used 14cc head from a Honda GX160. $60.00 shipped. PM me if interested. Bottom picture is the engines these heads came from.

got a 14cc honda head with a worn intake valve seat. Perfect for somebody doing a big valve head project. $45 shipped.

New:Honda GX200 shortblock,MDB Honda 28.5mm 14cc Head,Billet Ibea Carb I have a brand new Honda gx200 short block, from Russell at NR Racing. It was from a new in the box motor that had the head,and acc. removed as I only wanted the short-block. Never been run, assembled etc. Asking $160...

I am looking for any and all REAL Honda gx160 18cc or 14cc heads, pm what you have.

I brought a 14cc head from ebay and have finished porting it. I am ready to mount it on the engine but then realized that the locating pins that the mounting bolts go through are on the bottom instead of the top on the 14cc head. I tried to remove both and move them down but had to destroy one...

Im looking for a REAL Honda 14cc or 22cc head.

What head would flow better? A 14cc head unmilled with 28.5 intake valve or a 18cc head milled to 14cc with 28.5 valve? thx:smile:

I have just installed a 14cc head from a honda engine. i have a #90 jet and gx140 e-tube. is this an ok set up?? i was told that i need to install the stock e-tube back in the carb since i installed the new head shoulg I ??

I have just installed a 14cc head from a honda engine. i have a #90 jet and gx140 e-tube. is this an ok set up?? i was told that i need to install the stock e-tube back in the carb since i installed the new head shoulg I ??

Found this post over on Bob's karting forum, sounds like a pretty fair deal if anyone is looking for a small chamber head 4 Cycle Karting Forums

alright I just installed a gx160 head on my 200 and the thing is a bitch to pull start. I can start it but the recoil is crazy rips the cord right out of my hand at times. its not fun at all the thing almost takes my arm off. and Im no light wieght. what can I do to fix this problem. I also...

So over this past week I've picked up a 14cc head, ported it nicely, and ordered a set of stock size stainless valves, 26lb springs, and billet retainers. So far my engine looks like this: GX200 14cc head + gx200 gasket Flat top piston Stainless valves 26lb springs Billet rod Header...