1. S

    1969 Bird Duck Handle Bars & Forks

    I’ve been looking all through Craigslist list and Facebook market place for a bit and I can’t find these bars for my bird project. If anyone has these bars please let me know. I’m looking to pay around $50. Only PayPal goods and services. I hope I’m using this section right
  2. S

    1969 Bird Mini Bike Forks And Questions.

    I have a 1969 Bird Mini Bike and that i'm restoring and I have some questions. The way that i got it in the forks are definitely not the way they should be they looked chopped and there are weird tubes welded to it and basically I need a new fork for the bike. I cant find a fork that is the same...
  3. S

    Seat Shock For 1969 Chopper Mini Bike?

    I'm looking to restore what I believe to be a 1969 Bird Chopper mini bike. I'm having trouble finding the right shock for the seat and the right type of seat for the bike if the seat needs to be specific. Does anyone know what it is and able to help me out. I have a picture of the brochure of...
  4. Steve73

    1970 cat 400x

    Picked up this sweet cat. Its a runner. Anyone have a proper chain guard for this that wouldn't mine letting go I would be very appreciative. I have a cat guard to a chopper with a slanted engine but not for this one... Enjoy the madness..
  5. Magazine article

    Magazine article

    mini bike comparison
  6. ooops


    a holess
  7. 1969 Rupp

    1969 Rupp

    gathering parts and mocking up
  8. sears mini bike

    sears mini bike

    will it work
  9. Rupp Rat rider

    Rupp Rat rider

    mocking up 2
  10. Indian wall of death bike

    Indian wall of death bike

    My second build
  11. T

    throttle cable 1969 taco 3 hp briggs & stratton

    hello all, i need a throttle cable , 1969 taco 44 orig throttle cable is no good , it has a small round ball on the end were it goes into throttle were can i get one that will fit ?? thanks bobby
  12. T

    1969 taco 44 questions and need help so please read

    hello all, i have gotten all the parts and hope to my 1969 taco 44 back together starting tomm, my questions are the wheel extenders ( frame extenders) do the go inside the frame or outside ?? bolts facing in ?? or facing out ?? new bolt for front tire and new spacers should...
  13. R

    Artsy photos by my son. 1969 Rupp

    Posted these in photos section, but not sure if that's just a storage spot. Anyway, here are two shots my 12 y.o. son took of the Rupp he's been riding since we completed the restoration this spring. Based on a bunch of other shots he's done, I think he may have an eye for photography...
  14. T

    is there any value 1969 orig taco 44 tires??

    hello all, is there any value to 1969 taco 44 tires ?? i have mine they are dried out just curious if there is any value to them ?? thanks bobby
  15. T

    1969 tacio rims

    hello all, anyone have a nice set of stock rims for sale looking for a set for my 1969 taco , hoping to find a set that needs no work thanks bobby
  16. T

    1969 taco brake question

    hello all, i am redoing my 1969 taco from the ground up i have a new set of rims for it well they are three bolt not 4 bolt like old ones , so today i got new sprocket bolts right up my problem is my bendix brakes dont fit in they are just a little to big anyone ever have this problem...
  17. T

    1969 taco nuts & bolts

    hello all, anyone know where i can get new nuts & bolts that hold the shocks on and a new bolt & nut to hold the fork to the frame and new front nut & bolt ( axel) for the front tire ?? cant find crap at hardware stores anyone know of anywhere to get them let me know thanks bobby
  18. capguncowboy

    1969 Rupp Sprint (Parting out)

    Sorry, the bike is a little dirty from Windber, but it'll be cleaned up this week. Nearly complete 1969 Rupp Sprint Survivor. The engine was gone through and the valves were lapped, new head gasket, new crankcase gasket, new spark plug and crank seal. The carb was giving me fits, so I...
  19. T

    1969 taco shocks

    hello all, does anyone know where i get get a pair of 1969 taco shocks black with the chrome around it ?? let me know thanks bobby
  20. T

    1969 briggs & stratton parts needed

    hello all, i am trying to rebuild a 1969 taco it has a briggs & stratton 3 hp i am looking for the carb part number 393977 and the 3 quart tank any help would be great !! i check ebay & craigslist everyday