6.5hp

Baja heat 6.5hp no governor and won't start please help Ok so I've had this baja heat for about 2-3years it's been running good and I decided to make it faster right before It started right up and then I took out the governor and put everything back on and now it won't start up it has spark and...

What battery are you guys using on a 6.5hp clone? I think the one I have is a bit too small but I want to see if anyone has one that is working well to start and charging well....

Hey everyone like the title says I want to buy an engine. Preferably that already has billet flywheel and rod. Thanks for looking Sent from my LG-P930 using Tapatalk 2

A few days ago I bought a 6.5hp Powerfist (Honda clone) engine off of kijiji for $50 that I have intentions on putting on my doodle bug. Seller said that it came off a rototiller and ran a bit rough. So I figured I would buy it cheap and get it running right. I brought it home and it...

Hello to all! Ive been stalking the site for a little bit and have seen some nice rides. A friend of mine has a baja racer with a predator 6.5hp on in and did a bunch of mods to it, nothing to look at but it’s a blast to ride. I used his bike as my inspiration to make my mini quad predator...

ok guys not reallt new to the forum but this is one of my first few posts anyway ive tore down my clone and been getting it race ready as well as fixing a few worn parts when I came apon a device/part that I have no clue what it is or its function is said piece is attached to the back of...

The way my motor is mounted on my gokart, the drive shaft is too short so that it doesn't line up with the axle. The type of axle i have is one that the wheel rotates around it, so a sprocket must be mouted to the 1 wheel and a chain to connect wheel and clutch. My clutch and sprocket won't line...

So the motor has the stock killswitch and it works fine.. My question is How can I make the killswitch easily accessible on my gokart.. I dont want to reach behind the seat to find it on the motor... Can I somehow ground it the a toggle switch mounted on the frame? Would I need to add extra...

I have various stock 6.5hp honda clone parts for sale, what you see is what you get, everything here is in good shape, just how it came off of the running motor (I tore the motor down to add a cam, billet con. rod, etc. but never got around to it, and I prefer flatheads now). stock coil, $15...

building a mud motor , after reading numerous post on this website decided to go with the 6.5 hp greyhound engine as i got it for free. the plan is to try and get this motor up to the 11-12 hp area.The reason would like to use this motor and up the horsepower is because its going on a small 14...

Looking to sell my manco mini bike looking for 300 cash or a 6.5hp clone + 200$. Engine has 22mm mikuni carb with intake, mikuni fuel pump, 130 main 17.5 pilot (needs to be rejetted it's lean), 18lb valve springs, 1.3 stamped rockers, governor removed, new clutch, chain, sprocket, engine revs to...

My Kohler 6.5HP Command pro Model CS6ST needs a carb. What is aftermarket carb I can get plus air filter and exhaust to bump HP a little?

Hi, I'm new here. So if some rules may been broken that it's unintentional. Here is my short story – I got a long tail motor based on this engine and performance looks very poor ever after tune up was done – valves, carb, governor, spark plug all to manuf spec. Reading on forums, I thought to...

My mb165 ran great before I put it away. Pulled the carb and cleaned everything up and added fresh fuel. The carb was new last season. Now when I add throttle from idle it immediately stalls. Thoughts based on symptoms? It's an after market carb that you can adjust the pilot...

Does anyone know if this clone will accept gx200 mods like camshaft, rod, piston, flywheel...? and is the black mamba for the predator 212cc capable of being put in a gx200 or lifan clone?

25$ shipped i changed my carb to a mikuni and this one barely has any use, great power gains, comes with carb spacer and choke lever too

Has anybody ever used a 6.5hp clone or GX200 carb on a 5hp Briggs? :shrug: My buddy and I were hanging out in the shop talking the other night and he asked me because he was thinking about trying it. :thumbsup:

Hey guys, Im having trouble finding a crankcase cover for the harbor freight 6.5hp engine, the 66015. Ive ordered two, there both big by 3/8 on bottom hole only. Then I ordered gaskets from 4 different places, all big.. I was told its hard to find the gasket and side cover for the 66015.. All...

I found an old Toro lawnmower someone threw away-it has a 6.5 hp Tecumseh vertical shaft on it. It ran on starting fluid,so I assume it has a carburetion issue. Could I convert this thing to a horizontal shaft engine if the carb was somehow turned to level and I install a new type of oil...

I am in need of cleaing it and doing an oil change so i have a few questions, A) has anyone used this stuff if so how easy was it and did it work good. Buy Solder Seal/Gunk Engine Brite® Heavy-Duty Engine Degreaser (15 oz.) EB1 at Advance Auto Parts B) on a Greyhound 6.5hp motor what oil...