adapter

I've got a new in the box UNI dual stage filter and the adapter for a GX200 or clone carb. I ordered it from AGK, its this exact item... affordablegokarts: Air Filter Adaptor & UNI Filter It came out to $31.49 w/shipping, I bought it because I thought I was gonna use my old clone carb. But...

i need a new carb. Or i need a way to remove a broken air/fuel mix screw. Im pretty happy with the power of my current setup. Can i get a mikuni and mount it to the engine without an adapter? I would have to use bolts rather then the intake studs right? Since im not looking for power, and it...

Ok I have been working on a adapter to use a 2-piece Horstman Racing Sprocket. Basically it will bolt to the stock location and allow you to go with any gear that Horstman has to offer (currently 53-85 tooth in 35 pitch). It will keep the stock alignment so no shimming will be needed. The only...

Hi, New here and hope someone can give me some help... I recently came upon a good used Briggs and Stratton Intek 190 as a replace for son's old go-kart. Engine runs great (had a good clutch already on it) - runs smooth with me riding shotgun manually opening the throttle by hand. I cannot...

i no longer need these and they've just been sitting on the shelf. they've been installed but the engine was never run with them on it. i think there's one fin that's a bit bent on the filter but other than that it's fine. i can't remember who i got these from (either AGK or NR). they will...

Hello, I am selling my AGK billet air filter adapter with filter,and also a very trick throttle linkage kit. With the linkage kit you can not use your GOV any more,This is one of the best priced, and user friendly kits Out there. I will post a link of the throttle linkage, and I have tried to...

I finally have adapter plates for the older DB-30's with the 8 slots in the frame engine mount plate available. The plates allow you to easily mount a 6.5hp HF/clone/Honda engine on the DB-30. The slots in your frame may have to be cleaned up with a file to get the 5/16 mounting bolts thru...

Anyone got any ideas on how to design a custom airfilter adapter to mount the round air filter on a OHV briggs? Or maybe even a volocity stack that would be cool :thumbsup:

I need 6.5 engine adapter plate for baja db-30 nautiqueman