alcohol

Hey y'all, I just scooped up a Dover Power Briggs and Stratton Raptor alcohol race engine on eBay and was planning on converting it back to gasoline. I was told that it's just a matter of jets but I figured I would ask. Plan on putting this in either my Easyrider or Sensation

I'm looking for a good pulsajet carb and tank. Gas. I have a nice 348 alcohol Tillotson and manifold set up to trade.

Would it possible: To build a drag motor with a dual carb manifold, and run 1 gas carb and 1 alky carb? And have 2 tanks with separate fuel systems? And pull start the motor and get it running on gasoline and then switch it over once it's running to alcohol? Obviously there would have to be...

I need a late model recoil,starter cup and crank nut. Also looking for a gas carb. I have an alcohol adult stock carb to trade if interested.

Wheels of Death Uh...yeah. :no:

i've got to thinking about building a bike with two meth burning briggs engines, with the clutch, is there a special sprocket for engine #2? say if one engine is running more rpm than the other, will it be pulling? something where if the front engine is pulling, it has like a ratcheting effect...

Hey OMBer's I HAve A Quick Question I Just Bought A Blockzilla 2 From A Friend With a 28mm Mikuni Carb Set-Up To Run Methanol I Really Dont Wanna Run Methanol Because Of The Maintenance That Comes With It Drain Fuel Lines etc How Can I Convert It To Run Alcohol Can I Just Get It Rejetted Or I...

so i was trying to sell this frame, nobody was interested, even at $50 with the wheels and whatever. well the other night i went to buy a dirtbike off of craigslist and this guy asked if i knew anyone in go karts, said no not really but if you have parts id take a look. well i saw this baby, its...

I bought this for a Briggs Animal engine thinking it was a gas carb but it's set up for alcohol. Nice and clean inside. It has a #38 pilot jet and a #137 main jet. It also has the alcohol needle in it. Could use a new bowl gasket. Price is $75.00 + $8.00 shipping. Paypal only ! Thanks Ed

I have friend with an outlaw S/A clone engine. It has a 390 carb on it converted to alcohol. I converted it to alcohol a while back and we dynoed it with good results, however on the track they said it has a stumble when getting back in it in the straights. I did not drill the holes behind the...

I just got a hotrod raptor engine with an hl348e tillotson carb setup for alcohol. This is the first tilly carb i have owned and im looking for some help setting that carb up for gasoline. I dont know anything about this carb yet but if anybody has some info on whether or not it can be done or a...

Clone with a flat top piston,arc aluminum rod,ported head 27 mm ss intake-stock exh ss valve and 308 cam.When going to alcohol what mikuni carb should I use and who's got the best deal?

Why can't I run alcohol on a standard gas carb?

I am hoping someone can help me with information on this race kart. I am selling it to fund my other projects but know nothing about it other than it runs on alcohol and the little briggs pumps out 12 horse. My niece raced it and my dad gave it to me to sell, he knows nothing about it either. I...

Ok I have this really modified yf200 will the carb fit on clone 6.5 or briggs 5hp :shrug:

What is the correct way to set up these engines for alcohol? I've got different explainations from changing floats to doubling the size of jets....... :confused: a straight correct methodology would be appreciated. :shrug:

Its was blueprinted by Korndog at the end of last year. It has not been used since i got it back. Decided against the alcohol at this time. It also comes with a manifold. $130 shipped

Well, I guess there's a reason some things are free. Picked up a disassembled 5 horse Briggs "alcohol" engine. The only parts I see that are salvageable are the head, side cover ,crank, and flywheel. Maybe the lifters and valves.

I am looking for a alcohol carb for a Briggs 8hp I/C OHV engine. Is there a manifold made for this engine? I have heard that the alcohol makes your oil turn white. How often do I have to change my oil? I will be using the engine in the winter. Thanks

is it possible to do> I have a 14cc head 8 degree fly wheel key. and a 252 cam from nr.