angle

When you mount an HS40 on an angle, do you need to reduce the oil capacity? I have 21 ounces in my 80's HS40 but the angle mount dipstick says it's over capacity & it's full to the filler neck. thoughts?

Horstman angle plug head. Great shape. $60 shipped

I am in the market for a good digital angle finder. The old eyes just don't read those scratch marks like they used to... Anybody own one? I don't mind spending the money to buy a good one but I don't want to spend any more than I need. It is something that wont get used all the time but used a...

Does anyone have, make or sell a 20 degree carb wedge? I have Rupp's with the slanted HS40 engine. I saw on old post a while back where a guy was selling 20 degree wedges that go if front of the carb but can't find the thread. They were cheap like $10 shipped or something like that. I can't...

Lately, I've seen several frames on CL with forks that appear to be bent back a bit as if someone ran the bike into a wall. Where the bike designed this way or are the forks bent? Thanks, JR EDIT: Title was supposed to be "unique", not anique.

$65 shipped

Hi guys, I'm starting to build a scratch build bike and am hoping someone can assist with the rake angle. What I'm considering is a bike roughly the size of an Azusa bike and have no idea if there is a golden rule for the rake or what might be a good starting point. Any input would be...

A buddy of mine had this bike as a kid. He said it's the only picture he can find of it. It looks like the engine plate is rolled over like a Cat or a Nova, but it doesn't look like either to me. Is the head badge original?

I am currently building a chopper mini bike. And I put the motor on and it sits at a angle. Is there a angle where its too much angle and will run the motor dry of oil?

Hey guys. Almost done with my race frame build and I have one more issue to fix. The engine block makes the engine lean forward(I guess to clear the rear wheel). The problem is that the fuel line is on the back of the engine which is higher then half the tank. I honestly don't know how the...

I have the 212 predator on my MTD bike. The engine came off an old wheelhorse with no issues. But when I ride it, not even 5 mins. It wants to die. I disconnected the oil shutoff, made sure it had plenty of oil etc. I was wondering if because of the angle it's mounted is effecting fuel...

just like the title says...looking for an old Westbend 820/610 Right Angle Carb Elbow to fit a Tillitson HL style carb...I think all the manifolds are the same. I know you can get one from Go-power or Rokon or whatever but I need an old gnarly looking one for a special project...:wink...

New to the forum and new to mini bikes. Denied as a child and finally making up for it as an adult. I just picked up a Speedway Blue Angel. It was reported to have only been run 3 times in the last ten years. Runs rough and slow. I'd like to get this running right and I'm not afraid to spend...

angle motor plate with hardeware $30 shipped http://i742.photobucket.com/albums/xx62/yellownova/slotcarsforsale029.jpg

:grind:My wife just gave me a 4.5 dewalt 4.5 angle grinder for my BD. Now what do i need?

Here is the real story why we put a Angel on top of the Christmas tree! When four of Santa's elves got sick, the trainee elves did not produce toys as fast as the regular ones, and Santa began to feel the Pre-Christmas pressure. Then Mrs. Claus told Santa her Mother was coming to visit, which...

Putting in a Fox,for Tecumseh 3.5 H35. It has a bowl carb. Pics? Price? Thanks

Can the stock valve seats on a head that has never been run before have a three angle cut done without replacing the seats? If so, what, if anything needs to be done to the valve head itself? How much of a benefit over stock would this provide? What is the average cost of having such head work...

I have seen a few threads around here about mounting an engine on an angle so that a TAV won't hit the frame. The thing is, I have not seen anyone asking about my particular model of Briggs. So here comes the question. Should I be able to mount my 5HP Briggs (model 13200) on about a 15...

will the mikuni vm 22 mm.carb function as it should on a 15deg.angle set up for a kart Im just now putting the final touches on my clone I had to use a 15 deg.engine mount Im not sure if the carb is going to work on such an angle?? anyone know??