bearing

am looking to buy or trade a dual bearing crankshaft for a briggs 5 hp flathead let me know what u have,.......

Hello everyone I hav an 5 hp b&s flathead and I'm in the process of taking it apart and I ran into a problem which I think that the crank case side cover bearing bit onto the crank shaft. So basically I've done all the steps necessary to take the side cover off of the block, so how should I free...

so im about to install a new cam on my briggs raptor but i cant get the bearing off the crankshaft what are ways to get it off ive tried prying it already no sucess though

I have an old Briggs engine with a badly worn crank,the clearance on the rod journal is .020 instead of .002.I am going to attempt to wrap a piece of .008 aluminum around the rod journal on the crank,this will give about .004.This looks like it could work,this engine is going to be used as a...

HS50 Bearing engine has compression but very weak spark. Should be rebuilt. $100.00 plus freight. Has broken Fin at corner of head, Rust on the backing plate. I'm offering it here. If you guy's don't see the value in it I'll have Randy pull the bearing crank and bearing side cover. There doing...

I am now looking for a HS50 crank with a bearing or motor, but I need a engine number or a crank or part # to search for it. Thank you for any information.

I have a HS50 that I want ot put in a 1971 Rupp Roadster 2. I want to change the side cove so it "looks correct for the Rupp, but the original Rupp side cover has a crank bearing and the HS50 does not, will it work to just change the covers, or is the crank different? Also to run this without a...

I was wondering if you can put a duel bearing pto cover on a stock Briggs block?

looking for a bearing side cover to fit a Tecumseh OHH60... Also like to find a performance cam, rod or other performance parts.. The cam and rod from an hs50 will also fit if that helps..

where can i buy 3 hole bearing hangers anyone got 2 or 3 sets thay want to get rid of thanks shane

i need a 5 hp briggs block or complete or somewhere in between engine with this style of intake flange.

Does anyone have of those, if so please emaikl me with pics happydingdong@live.com

I have a 6.5 briggs Intek I.C steel bore dual bearing block and side cover, standard bore.... $35 plus shipping

PM me with what you have, this has to be a large bearing to work with my IC crank... Thanks, Randi

I need a briggs 5 Horsepower Model 13 flathead Bearing Side Cover, Anyone?

I have a small pto bearing cover and an IC crank with a 1" step up, is there a bearing for this or will I need a large cover? any info will be appreciated..

i am building a motor and need a block. where can i get one? and which engines if i was to buy a complete engine come like this from the factory.

I am replacing the stock rod, do I need to get new bearings or can I use the stock ones. It is a new engine and has less than 5 minutes running time.

Bearing

bearing