bend

  1. jeep4me

    West Bend Feather Weight Engine

    Selling this 2 cycle west bend engine for a friend. Engine runs great but is cosmetically challenged. Includes clutch for #35 chain. No exhaust. Engine spins in the the opposite direction of your typical minibike engine. Can't post pics from my phone, but will post some when I get home...
  2. H

    West Bend 580 CCW

    Need it all, from the mount to the carb for an upcoming kart project. If the kart never arrives, I still need it for a Cat bike idea.
  3. boatguy

    West bend 820

    I need help from the 820 experts. I recently got an 820--model #82006. Everything is complete but the crankshaft is stepped down from 3/4 to what looks like 1/2in. The motor had a belt pulley on it when I got it. Question how do I get a standard clutch on it? Do I have to change the crank and if...
  4. J

    West Bend 510/580/645/700 parts

    All for 580 WB unless otherwise stated. All this stuff is for the,"round barrel' style. 3 wrist pins(new) 1 std piston(new) 1 +.030 piston(new) 6 misc piston rings 4 blocks (1 with removed/broken fins and +040 bore,1 excel condition std bore,2 others are std bore) 2 flywheels,1 RH and 1 LK...
  5. boatguy

    West bend 820

    Went to an Antique Outboard motor meet today--guy opens his trunk--has an 820 in it along with some outboard parts. Got it for $50 and it is mint--now I need a motor mount and clutch so I can put it on a LIL Indian--good day!
  6. DZLBIKE

    West Bend Gas Cap

    I need one of these weird looking gas caps. (or something similar) Thanks, sorry for the poor photo. Don
  7. D

    If I bend the peg back will it break the weld?

    I've been looking at this bent peg for weeks, wondering it it can be bent back. I have an iron pipe I can get on it. Maybe I could bent it with someone's help. But what are the chances I break the weld or kink the peg pipe instead?
  8. DZLBIKE

    West bend 580/700 tank and mount

    I'm looking for an engine mounted gas tank for my Ruttman build. I have a functional one off of an old Jacobsen, but it just doesn't belong on a WB580. I haven't half aszed anything on the bike yet, so I'm in the need of the proper tank. Thanks
  9. O

    west bend engine parts pieces

    A small pile of West Bend engine parts. all the parts are pictured. Stock intakes, and case half. forgive me I dont know alot about west bends. these parts came to me in a trade. All parts look to be usable. No breaks or cracks. I would take $35 for the pile including shipping to...
  10. DZLBIKE

    West Bend 820 mount and exhaust

    Hey guys, I need a West Bend 820 mount and some kind of exhaust for my upcoming entry for the build off project. I don't know what exhaust I need, but will know it when I see it. The exhaust I have now will either catch the seat on fire or totally roast my chums. I can replace...
  11. J

    West Bend 580 Kart Engine

    580 West Bend,5.8 cu in(about 5 hp)with new piston,chrome rings all new bearings/seals/gaskets,new recoil,mount and Reed muffler,rebuilt carb,lite flywheel,6 petal reeds for the intake,crankcase stuffer insert.I did not paint the flywheel shroud,it has some lite pitting,plus you can pick...
  12. markus

    First run..West Bend 700 powered Azusa

    First run for me actually. Many of you probably saw this bike listed in the classifieds for sale along with a Rupp cub/econocycle a few months ago. Well I was the lucky buyer of these bikes. The Azusa is custom built By Joel Wey, Very well built bike, with vintage parts added. Some...
  13. MINI-MATIC

    Tubing bend radius

    Can anyone who is familiar with tube bending give me an idea what the smallest centerline bend radius can be for 3/4 tubing with a .065 wall.I already tried a 1 1/8th rad with no luck.Hopeing a 1 1/2 rad will work.This is for a custom exhaust on a super small mini.Any help would be...
  14. latest load of crap from Lennys

    latest load of crap from Lennys

    I should stop buying shit
  15. J

    TACO 55 w WEST BEND 700 COPY

    Taco 55 copy,all the stuff is new,check out the pix. $1350 plus shipping. email for more pix or info(if interested). jw
  16. 6

    Arctic Cat Screamer almost done

    Heres a couple pics of my 2nd Screamer im finishing up for the Ann Arbor show & Ubly drags in August. Needs chain & fuel lines still. This is my favorite mini bike of all time!!
  17. MALIBUCOOPER

    U.s. 820 west bend engine horstman clutch

    HORSTMAN 219 TOOTH CHAIN SPROCKET SINGLE DISK 9/16 KEYED STRIGHT CLUTCH FOR WEST BEND 820, EXCELLENT CONDITION! $99.99 + SHIPPING, MALIBU CA. :thumbsup:
  18. J

    Minibike engine West Bend

    This one is same vintage as the WB 700 I listed in a previous posting. Has a chrome bore,1-9/16" stroke and 2-1/4" bore(short stroke 700).Has a stuffer in the crankcase,6 petal flat reeds, HL 239B 241 carb modified to run this mill,old style flywheel shroud and recoil(new recoil)clutch with 11...
  19. J

    West Bend 700 Kart/Minibike Engine for sale

    Includes mount,chainguard,exhaust(polished)HL135A Tillotson carb with choke,early recoil starter and flywheel cover,9/16" shaft with 1/8" half moon key slot,engine has new bearings,seals and gaskets,test run on the bench and ready to use. Displacement is 7.0 cu in (bore 2-1/4" X stroke 1-3/4")...
  20. Gustavo

    NOS West Bend 820 Engine

    Hello there my friends Selling this NOS west bend 820 Model number 82002 It has a keyed crank but you cant see the keyed part in the pics I bought this with the intention of putting it on a Blackwidow since someone on ebay gave me that idea a while back but I just never got there and also...
Top