bender

I've had enough of making Z bends with two pairs of needle nose pliers. Can some one recommend a Z bend tool off e-bay that's worth getting ? I've seen about 4 - 5 different ones. Z Bender Tool for making carburetor linkage Thanks, Cory

Don't know if anybody is in the market for a bender but I thought I would post this in case someone was considering one. Bottom-line pricing on Woodward Fab WFB2 at ToolTopia.com I have a JD Squared that I have had for 25 years. Cant beat it. Doug

looks old but rustic.......wish i had the spare change to put it in my shop

Mini bike Fabrication tools for sale: If you do a name search here you can find 2 builds that was done with this equipment. Mini bike frame jig/welding fixture. Fully adjustable for length, rake and height. If you can use a tape measure a level and a plumb bob this will produce dead on...

Hello I am considering buying an exhaust tube bender and didn't know what others out there in the mini bike world are using. I would like to make my own exhaust and prob wont bend anything larger that 1" steel. Any tips or help would be appreciated. Thanks! Jason PA

Somebody was on here at one tie selling dies for the JD2 tubing benders, a buddy of mine is ordering one and wants to order about 4-6 sets of different size dies. Can anybody direct me to who was making and selling the dies?

Does anybody out there have a JD Squared bender with a 180 degree die for 7/8" tubing on a 3" center line radius? Reason I'm asking is I have two pieces of 7/8 x .083 wall DOM tubing that I'm looking to have bent and was trying to find someone with a bender like this. These two pieces are only...

Just a mini project for my tubing bender (JD2 model 32)... its going to be hyd. but for now going to bend everything manually... the way my garage is setup and constantly switching between projects, I dont have room to mount the bender in a fixed location... i decided to make a rolling...

Hello guys, here is my jd2 model three tube bender build. Done myself with the plans, ordered the die and of course converted it to air hydraulic ram. 100_1877_zps1ca6a51f.jpg Photo by Jonester_2010 | Photobucket

Hi im a noob from san diego and just wanted to get a quick opinion. Did a search and wasnt able to find my exact questions. Please bear with me. If i simply wanted to bend 1 inch pipe to build some frames, would there be any reason the 16ton would be preferred over the 12? and would this be...

Hello, I really need to pick up a bender (manual or hydraulic) so if you need to offload one, let me know! Sent from my iPhone using Tapatalk

Here is a neat DIY tubing bender Easy Fork Blade Benders Remember to heat the pipe to prevent kinks. I've also used a 12" wheel to bend tubing.

Has any one used one of these? If so how did it work? Thanks Mel W. Portable Manual HAND Metal Round Square PIPE Tube Bender w/ 8 Dies Features: Compact Hand Pipe Bender 6 ROUND Pipe Dies: 3/8", 1/2", 9/16", 5/8", 3/4" & 7/8" 2 SQUARE Pipe Dies: 3/4" & 1"...

Yep got me a Pro tools model 4 manual bender . A friend of mine bought it for the 1 inch die ,and I got the 1/2" and 3/4 dies which are pretty useless for mini bike building . But the 1" die and a 1 1/4" are just down the street and Mine to use . So it's time to build a frame , will post pics...

I just got a 7/8" J-d 3" radius die and im making my own little bender to use it but I need to figure out the distance between the pins of the die and the skid. Also the blocks on the skid plate are not paralell which i wasnt expecting. do i just put the numbers facing up and call it good? heres...

Eventually decided I had no choice on this one - the local bender for sale is almost 1000$ and its a wrap around type, not the high quality pull around type. The JD2, JMR and Hossfeld prices are not bad, but shipping is insain. This type of bender is essential for me as everthing has to be...

Finally upgraded my tube bender. This thing makes beautiful bends. Thats a piece of 1" .120 wall DOM bent 180 degrees on a 3" radius. No deformation at all. Time to build a new frame!!

Does anyone own a HF bender with these dies to make minibike frames and does it actually work. I have the bender but not the grooved dies yet. 3 Piece Die Set

Im looking for a 7/8" 2" radius for my buddys hossfield tubing bender to complete a job for me. Let me know if some has one i can buy or borrow. thanks guys

Search found nothing. Can a decent mini bike frame be made using one of the HF pipe bending tools? I see they make a hand driven one and a hydraulic powered one. will the bends be well made or are the tools junk?