I need help on how to fix a broken bolt and striped threads on my crankcase on the briggs 5hp raptor. The biggest problem is that it is not sealed and oil comes out through the hole for the bolt. The threads are all striped on the side cover, but im pretty sure there is still good threads in the...
i have a harbor freight 6.5 horse clone with a 3/4 shaft and i was wondering if anyone can tell me the bolt measurment i need to get in order to hold my clutch on the shaft. if anyone can let me knw the bolt measurments i can run down to the hardware store and get it and be out on the road =)))
For Honda and Honda Clone gx160 (5.5 hp) and gx200 (6.5 hp) Engines
This is the size list so far of the bolts and some torque values. Please let me know if you have anything to add. Please note these are the stock sizes and torque specs, please when installing aftermarket parts consult the...
hello all, well i started a ruttman project and the bolt that holds the forks onto the frame was rusted to $hit! and the head broke off for staters. i got it out but now need a replacement one. where is a good place to get one? anyone in s/e michigan can give me an idea where to go local even...
I am working on one of my Baja warriors and taking the engine off to clean/ rebuild her.
One of the four bolts holding the engine will not come off, I have took this engine off several times but this time it does not want to budge.
The bolt may be bent or something but from looking at it I can...
Does anyone know where they sell these types of 4 bolt hub and sprockets in 5/8 for a jackshaft? The only ones I could find were 1 inch for go karts. Thanks in advance.
Does anyone know off hand what the bolt size is that screws into the output shaft of a clone engine? I am at work and need to grab the right one on the way home and have no time to check. Can anyone lend a hand? I am bolting up the clutch for a TAV and it is heading up (before I head up on...
I have read much about the upgrade kit using the clone engine. I understand that a new mounting plate is needed for this which is part of the kit.
My question, is there any series of engines that bolt right up to the current plate or is the stock engine got a strange pattern?
I am looking...
The front fork bolt on my 40 year old Mini that I'm customizing is shot.
I know that I could use just a regular old bolt in it, but I thought I would ask if anyone knows of a place that may sell this type.
It's 5/8" x 9" long, fine thread, and the head round with both sides shaved.
Here...
Check out Nr Racing. Their header is a direct bolt on for the db30 with a 6.5 clone. It's got great flow, rumble, and it will even throw some flames. Naughty on the top end but behaved well enough in the low end for a cruise around the block anytime of day. Check out their dual pipes. With...
hello!
I am new to the site, this place looks like the place to be for minibikes!!
I was wonderin if anyone knew if any of the bolt on mounts from here would work with a flathead briggs on my baja blitz/db30:
Rieken's Racing: Briggs Engine Mounts - OUT2WIN.COM
OR.....does the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.