Looking for the two piece bracket set for the left side of the BC1400 H50 bike where the exhaust exits to the left side of the bike.
Mounts on the left rear shock mount.
Thanks.
Tom
I'm trying to find a crank cover w/ pto mounting holes. I have a fiber glass repop clutch cover & could a little insight on the bracket set up. Some pics. would be a big help! Thanks
Looking for the correct tecumseh side tank reinforce bracket
That goes inside shroud to help reinforce the side tank when installed
Should have the 3 holes drilled
Looking for a ap4600 whole headlight, bucket or just the bracket. I have one headlight that's missing the bottom mount bracket. There was 2 styles and either will work. Doesn't have to have the mounting block but I could use one of those too.
Does any one out there have or know where I can get a Rear Wheel Band Brake Bracket for a Trail Horse. Currently have one mounted on the Motor/Clutch but would like to have i mounted on the rear wheel.
I Purchased this engine from FloridaMini Bikes almost a year ago its been sitting in it original box
I am selling the One Gallon Tank & Bracket only
This is from the original listing
http://www.oldminibikes.com/forum/ph...s/DSCN1777.jpg http://www.oldminibikes.com/forum/ph.../DSCN17781.jpg...
Can anyone post a picture of how the clutch guard is mounted to the HS50 engine. My understanding is that the guard is the same as the BCs with the HS40. I have the guard. However the HS50 block is different without having the same threaded hole for mounting the bracket as the HS40. So I am...
As stated I'm selling an MTD Rambler or ss300 right hand mount brake bracket and used brake band with a new 7/8" brake lever.
If your MTD minibike has the jackshaft bracket and TAV the brake will not work so it must have the flat engine plate and the rear wheel driven from the PTO or left...
Looking for the short elbow pipe that connects the block exhaust port to the long tube chrome exhaust pipe on a BC1400.
Should I be looking at my local hardware store?
Could also use the 2 piece bracket that supports the chrome exhaust pipe at the rear of the frame.
I recently pick up a Green Horn Muffler. Is there supposed to be a bracket holding the muffler under the seat? Muffler screwed on motor only seems OK as is but is that how its was designed to be installed?
In reality the bracket looks fairly generic, but wondering if it looks familiar to anyone off a certain bike. It is a pre DOT stamped chrome accessory version of the light, not a standard trailer light (what was correct late 60's-early 70's on many bikes and offered in the lighting kits)...
I measured this tank and to the best I can tell, it's 8-1/4" long and 3.18" (3-1/4"?) wide. It was on an HS40 cart engine I picked up recently, but I don't know if it was original. It was definitely on there for a long time if it wasn't original.
The brackets and gas cap are included. Inside...
This is a fiberglass repopped Lil Indian clutch cover with hand made bracket. I made this for my Sabre but am now changing colors...this is painted a silverish gray color with clear coat. Not show quality...but every day rider quality.
$65.00 and I'll ship it for free.
looking for some idea on a licence plate bracket mount for my minibike. Just got it tagged and wanting to fab a bracket for it. just looking for ideasa if anyone else may have done the same thing. I looked at motorcycle and scooter tag mount but look a little awkward for the small frame of a...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.