briggs and stratton

I bought a Bird Engineering Go Kart for a project. The BS engine has a Pulsa Jet Carb (part 495939) with a slide choke attached by a rivet. This slide choke is missing. From what I can research, they don't sell that part. If anyone has an old carb body to sell or knows where I can buy a slide...

Ive got a Briggs 5HP block that I thought had a bushing in the exhaust valve guide(See Pic). Tapped it and tried extracting it its bending the 2 Steel washers in using to extract it...it wouldn't budge(ive used the same tools on another block with no issue). Is it possible this is really a...

Anybody in the bay area riding or know any spots to ride??

I am looking for a flathead 8hp Briggs motor. 8hp with 1 inch shaft. Shaft must be at least 2 3/4 inches long. Or provide me a model number and type to see if I can find a shaft to swap in. Cases should be smooth without studs sticking out, most I/C series engines will NOT fit in this...

Hi guys anybody out there have a complete Briggs and Stratton 3.5hp, model type 91232 engine for sale? Working or otherwise....

I am about to start this new build and I have a mikuni 24mm for it but I don't have an intake for it. If you have one that is pretty cheap, reply or inbox me and let me know prices. Thanks in advance.

I was wondering what type of ignition the 1968 Briggs and Stratton engine has in it. Is it magneto or some other type?

One of the mini bikes I bought a few days ago has this old Briggs and Stratton 2.5HP "Easy Spin" engine. I cleaned the external parts a bit and found a serial/model number on the side. It says: 80102 0168 01 6802191. Can someone help me track this down to the year this motor was made and what it...

Hey everyone, this is my first post here. I'm getting my first mini bike on Sunday and I'm planning to strip it down and completely rebuild it. It's a New Zealand made Tru Test bike and they're damn hard to come across here! I'm selling the GX160 and putting my 3hp briggs on it, as I want...

Is it possible to build an intake manifold for a 5hp engine? the motor has been bored and has a bigger cam in it. it makes 12hp on the dyno and runs on alchohol. i just ordered a 25mm carburetor. it is also straight piped. what does the intake manifold do? will it increase hp? how can i make one?

hey guys, im am soon to be rebuilding my briggs raptor. I was wondering if anyone has any info to help my build, thanks!

5hp & 3hp up for sale, 5hp was runnin lost spark, $125+s/h . The 3hp is in good condition ,needs a carb $60 +s/h

hey guys, i just saw a recent post like mine but not really the same problem. So i bought a 6.5 ohv briggs from a guy for $130. It ran great when i picked it up and brought it home. The throttle was pretty stuck so i took the gas tank off and losened up the bolt that hold the throttle down. I...

lil indian flat track style I got my first minibike 23 years ago when i was 7 years old. Growing up with a family full of mechanics and two older brothers our garage was full of minibike parts so none of our bikes were original. I never knew the make of the bike but i just recently found out it...

I've had a 900 series intek from B&S for awhile now, but me being a speed demon, i want more power. Are there any aftermarket parts for this engine? I'll be making a straight pipe forit soon, but are there any aftermarket parts like cams, rods, pistons, flywheels, etc for it? I'd appreciate...

Ok I have a Briggs and Stratton 5hp and I starts but it doesn't start unless I hold the choke and the throttle on why

Few months ago I got four frames, five engines, some engine parts, and a Rupp wheel and tire for a great price. Now that schools done and its summer I'm looking to get a complete bike together. Theres a Rupp frame with a briggs engine, and three other unknown frames. I'm looking to keep the...

Hello, My friend and i are building a go kart and We got a great deal on the kart and engine but i need to know 2 things. 1.What is the shaft size of the engine? (5/8", 3/4",etc...) 2.Where can i buy a key for crankshaft? (the key that keeps the clutch in place) It is a 5hp briggs and...

I picked up a few engines and some other things from an older property today and wanted to know what I got. I have a couple briggs and strattons one late 1950's and one later but I'm unsure about this third one. It has a clinton carb on it that doesn't look original and I believe it has the...

My first bike, time to sell. Moving on to slightly bigger bikes. :) Frame is in excellent condition, no rust, bends, cracks, or any other damage. Been in my shed every night since i got it. Swapped the stock engine for a 5hp Briggs and Stratton "Fun Power" flathead that came off of a Manco...