briggs

  1. Biffmini

    briggs part # help

    I picked up a 5hp briggs today. Ive tried four places including OldMiniBikes Warehouse, to find parts diagrams & parts list. using my model # 130202 087701 78080806 I cant find any lists for parts using my engine # I must be doing something wrong, its a popular model... Can someone help Please! thanks
  2. M

    Briggs 5hp tillotson

    I just got my first bike. It's a bonanza with a flathead and a tillotson carb I'm trying to figure out how to install my throttle linkage. I bought the ec lk-122 linkage I can't seem to get full throttle though. Also I'm using a single outlet mikuni fuel pump and when it's running I'm...
  3. MTchevy1

    WTB Briggs 8hp flat head parts

    Looking for a fuel tank, air cleaner assembly, and muffler for a long block I picked up. Let me know what you've got- thanks!
  4. CarPlayLB

    Briggs 3/4"NPT muffler NOS 5HP

    I have a new, old stock, B&S muffler, This fits the 5HP engines, or any engine that is 3/4"NPT. This is the good old heavy one and I am including the heavy "real deal" lock nut, not like the cheezy conduit nuts they use today. These vintage pieces can be yours for $22.00, priority shipped to the...
  5. Pasta

    5HP Briggs pops through carb

    Hi guys & gals. I've been away for a while but got back into my mini bike again recently. I have a little trouble hopefully someone can help me with. When I pull a hill, or throttle hard from idle, the engine pops through the carb. If I let off the throttle and ease into it, it will run...
  6. B

    briggs and stratton model N

    recently picked this up. I really wanted to see if anyone has any reliable links on researching what it is, how it works.. i mean, its a motor so its the same platform (gas-air/spark/exhaust) but i wanted to know how the carb mixes air. how the exhaust is mounted into the head. how the...
  7. W

    Briggs with a 3/4 by 3 inch crankshaft

    Hi all, Did Briggs make a 3.5 or 4 hp engine with a 3/4 by three inch crankshaft for use on a Rupp minibike? Thanks, Bill T.
  8. T

    1969 briggs & stratton parts needed

    hello all, i am trying to rebuild a 1969 taco it has a briggs & stratton 3 hp i am looking for the carb part number 393977 and the 3 quart tank any help would be great !! i check ebay & craigslist everyday
  9. TURBO RAT

    Briggs 3.5 on db30

    Anyone done a Briggs flathead on a DB30 that has some advice about mounting and chain alignment?
  10. drenchedgremlin

    Is this briggs worth rebuilding in your opinion?

    Hey, Im new to small engines & i really want to learn to fix them up & get them running. I have this briggs that i got as an extra in a deal. it is Model 80202 type 1101-01 code 82071903. I was going to semi-rebuild it or at least try to get it running. I am starting to think it is not worth it...
  11. WrenchDad

    Coil question ,Briggs 5HP model 130202-0135

    Hi guys Currently I cant throw a spark I can feel a small current if I touch the lead while pulling but I cant get a spark to jump. I have cleaned the flywheel and bottom of the legs, I have changed the condenser ,cleaned and set the point but still nothing. I know the coil contact leg gap to...
  12. 1

    Briggs & Stratton Exaust Pipe/Muffler

    Does anyone make a decent looking exaust pipe/muffler for a vintage Briggs & Stratton engine to use on a mini bike ?
  13. danford1

    Briggs Animal flywheel puller

    I'm working on a Briggs Animal engine. It has a PVL flywheel on it. It requires a simple puller like this one from Amazon. The problem is if I ordered it today it wouldn't arrive till Tuesday according to their web site. I would like to make one tomorrow and not wait 5 days for one. Does anyone...
  14. S

    briggs animal recoil starter

    I have a orange briggs animal thats set up for a kart electric starter i would like to set it up with a recoil starter to use on a mini bike....the briggs local option LO 206 has a recoil starter would these parts interchange?....if so which parts would i need and part #....also whats the...
  15. drenchedgremlin

    Need gasket set for briggs model 80202

    I am rebuilding an old briggs 80202 model, type 1101-01 3 hp engine. I am having a hard time figuring out which gasket set will fit as i cant find parts directly for the 80202. would the 80202 technically be a part of the 80200 series...
  16. W

    What Year 3hp Briggs?

    Why cant I post Pics???? What year is this briggs 3hp?? Model 80202 Type 1782 01 Code 85082903
  17. Possom point

    5hp Briggs governor arm leaking oil?

    Hey everyone, I was working on my other 5hp Briggs tonight, I've had this motor for a while and last time I messed with it the governor pivot arm was leaking from the motor side. So I messed around with it again and got it fired back up. Why would it be leaking oil where the pivot arm is...
  18. creia

    What minibikes or karts came with a 4 HP Briggs?

    You very seldom hear any discussion about these engines (much less ever see one in person), and it got me thinking... Was the 4 HP Briggs used as original equipment on any minibikes or karts? Of course the use of the 3 HP and 5 Hp Briggs is legendary, but why not the 4 HP? My (preliminary)...
  19. S

    briggs and stratton short block # id

    is there a book or listing of long block #s? like HB -1 491032.....HB 2(491033)..... HB3 491034.......HB 4 (491035.....HB 5 (491036........HB 9(491037.....HB 11(491038....it looks like all are horizontal shaft 6 and 8 cubic inch 6100... 80100..... 80200 and 80300 series......6 cu inch is...
  20. R

    5hp briggs i/c engine

    5hp Briggs engine with cast iron bore. Came off a generator. Serial numbers date it to 1980s era. Pics available but can't seem to pot them on my phone. $125 shipped.
Top