briggs

  1. danford1

    5 up Briggs. What year is this?

    I got this on a Minibike today. What year is it? Sorry for the sideways pic. I posting this from My cell phone and can't edit it easily. Danford1
  2. Possom point

    Picked up another Briggs

    Picked this up last week. Serial number. 170402 0547 01 6910021. So do I have here a 1969 motor? If I read the identification right....
  3. S

    1980s 3hp Briggs help. Looking for a clutch!

    Hello everyone. Im looking for some advice on fitting a clutch to my 3hp. I got this from a lpcal person and it was fitted with an alcon water pump. Ive removed the pump to take a look at the output shaft. Its 2inches long, is part threaded and has no keyway. Im confident enough to...
  4. Racer

    Briggs & Stratton 60100 2 1/2 HP Ignition

    Here's page from parts list showing ignition. http://www4.briggsandstratton.com/miscpdfs/RNT/Antique%20Manuals%20FAQ/Antique%20IPLs/MS4234a.pdf Page 3 Want to remove kill wire and use tab on top of sparkplug to stop engine. Wire comes under points cover from coil. Looks like one...
  5. Not so mini bike

    Briggs ARC rods and flywheel

    1- ARC 6377 stroker rod in box. Looks like it is slightly used $52 shipped 2-ARC 6370 stroker rods. Used. $45 shipped each 1- ARC 6213 stroker special rod. Used. $65 shipped ARC flywheel. Used. Looks like aluminum was welded in for weight or balance. $55 shipped 4 spring 2 disc smc clutch...
  6. S

    Briggs 3HP For Sale

    Here's a clean Briggs 3HP engine. I was sold this as part of a frame/engine deal, with the engine misrepresented as a 5HP Briggs. Obviously, it's a 3HP, not a 5. I was never given pics of the engine. Was told it runs good. But I need a 5HP. Comes with clutch. My loss is your gain. $50 +...
  7. R

    Throttle Return Spring Question...Briggs 2hp

    Here is a photo of my Briggs 2hp that came on my Bonanza. It is a 1987 motor, model 60102. It arrived with the big return spring coming off a head bolt, obviously wrong. What is the correct set up for the return spring? It looks like there could have been a spring that wraps around the...
  8. J

    Briggs Raptor PN

    Hello, Getting ready to put together a NOS Raptor block for my Lil Indian 6000 project. The block is steel sleeved. I have a NOS .020 piston kit for it. Briggs PN 555094. Just want to have confirmed it's the correct piston for a sleeved bore and not for the Kool bore. Any help would be greatly...
  9. 72shriek

    Briggs v Tec mounting

    Forgive the basic question here, I've been away from small engines and mini bikes for twenty years. Do most of the small engines have a common mounting pattern or are Tecumseh totally different from Briggs small engines? The current cobbled up plate in my Shrike is set for a Briggs I/C 4...
  10. danford1

    Briggs Animal decals needed

    I have a Briggs Animal engine. I have the normal Briggs and Stratton decals, but I'm looking for an "Animal" decal. Who makes them and where do I get them? Thanks Danford1
  11. W

    Help! Trying to prevent con Rod failure

    Hi, I'm new on this forum. Im currently working on a project trying to increase the horsepower on a old mini bike engine (Briggs 3hp) without using any aftermarket parts. I did a lot of work to get more power and rpm. Now I want to increase to tolerances of the internals. The stock...
  12. electrathon

    3 hp gear reduction Briggs

    Forgot I had this little engine sitting in the shop. Kind of cool with the gear reduction.
  13. Not so mini bike

    Old style Briggs 5hp recoil

    In good shape. Could probably be spun tighter to rewind better. Comes with mounting screw. $35 shipped
  14. L

    Wanted 3 or 5 hp flat head Briggs in Illinois

    Looking for a running 3 or 5 hp flathead Briggs for my boys go cart truck. Predator is going to require modifications.
  15. Richard W.

    briggs intek carb

    looking for a new carb for a 6.5 intek engine.these # are on the blower housing 4bsxs.2051 hf. 275821.Are these what i need to id this engine?
  16. 6doggie3

    5HP Briggs

    Hey guy's I picked up this motor for 50 bones at a modern go kart swap meet last week. I couldn't pass it up price with the pipe and manifold and carb but I'm not sure how to tell if it is a gas or alcohol motor? Thanks Michael
  17. roccosbike

    24mm mikuni and intake for briggs raptor

    Looking for new or very good condition VM24 Mikuni and Billet intake for a Briggs Raptor engine. Pulse fitting on intake a plus.
  18. derekbmn

    ~** Briggs Animal Parts**~

    For sale AS A LOT ONLY !!! Briggs Animal Take Off (And Out) Parts. All parts are from a VERY low hour stock Briggs Animal. Full Stock Head MINUS the Rocker Arms. (Extra set of Red Springs will be included) Stock Con Rod Stock .255 Lift Cam Walbro 22mm Carb with Intake Possibly a side...
  19. trinik7597

    Briggs raptor 3 recoil/shrouds

    Original raptor 3 recoil shroud $45 shipped
  20. trinik7597

    Briggs animal header

    Really nice staged animal pipe $30 shipped
Top