builder

Before anyone says anything I am the proud owner of a DB-31 and a 1970's Lil' Indian chopper that I am rebuilding. Having said that I would like to find out who could build me a custom chopper frame for my large body frame, kinda like a dream chopper for a 265 lbs. ol' fart! I live in Canada...

I have been on this site for a while and seen some really nice builds over the years what is your favorite build or builder For me it's Jeep2003 he makes some really cool stuff

I got a MPC model kit for Christmas :-) It is a 1/8 scale Rupp Roadster, 6" long. Im old. I used to build models when I was young. Now I have arthritis and doing small intricate tasks like building a model is damn near impossible. I can work in the garage on cars and minibikes, but not this...

I ordered the Azusa Kit with 8' wheels I'm building the bike for my 11 year old son. It comes with a 72 tooth rear sprocket and I'm wondering about different engine combos. Any info on gear ratio, torque converter and or jack shaft with the 8' tire would be great. Im just trying to...

I have a gx200 with 2.756 wiseco piston and rod, ambush flywheel isky 310 cam, big valve gx200 head,duel white springs, gage 1.2 rollers,28mm mikuni carb. On race gas. I can not get motor to rev past 5500 rpms. I have tryed everything I know. Now its time to send it to a professional. So please...

I'm looking to make my minibike an all around rocket. I want to go on long/fast cruises around the neighborhood and have some pep getting up and going so I can whoop my friends drag racing. I realize that is two ends of the spectrum. Right now I'm leaning toward a stage 2 kit with a billit...

Hey guys thank you for such a awesome forum. I've had my minibike frame for about 20 years and have gone through many different motors. Just bought my first predator 212 and really need some help with what up grade kit I should get. I want to go from 0 to fast as quickly as possible like a drag...

Hi Everybody, first time poster and builder as well. I recently purchased a Baja rider, and swapped out the original 97CC engine for a 212 Predator. There is nothing else on it besides the stock brakes, tires, and the 212 along with a throttle cable I replaced. My next question is--what...

Looking for an builder near Warren, Mi 48092 area code

looking for someone to do a quick rebuild on an hs50, I would sent short block all cleaned, I will paint myself re ring it hone it lap valves, new seals gaskets, maybe cam, points timing anyone out there? I don't want to stick a ton in it, but I know everyones time is valuable

Black Azusa is the older style, actually never got built into anything, so there's no extra holes or tabs, there are no rear axle tabs though. Orange is a an early CCS charger frame, its very straight but the lowers on the forks are custom. Forks are straight and they are just welded at...

Hi Guys, I would like to add to my minibike collection, right now I have a doodlebug DB30 but growing up in the 60's I had dreams of owning a Mini Chopper. Back then any size would have been ok but now I think the only chopper I would be able to ride would have to be either a custom frame or...

I am wondering if there are any Clone Motor Builders or where I can get parts from in the Metro Detriot area. I have a older HF motor I believe is a 5.5 hp. It has a red cover. I would like to have a few minor things done to. It is on a Ruttman Spiderr mini bike. I am also looking for a gocart...

Hey guys , I'm a new builder to mini bikes and I'm working on a design. The rake is at 20 deg. , trail is 4 1/8 " Front & Rear tire is 22x11x8 , ground clearance is set at 6 5/8 from axle to axle is 4 ft I'm looking for a good turning rad. not like a chopper. My question is ... with...

I am looking for someone within 50 miles of Adrian, MI who builds engines on the side and does excellent work for a decent price. I would like to gain another 2-4hp on my NOS military flat head Briggs 5hp I/C. Thanks DW

i have been a small engine mechanic for a few years and have been getting into hipo stuff in the last 6 months.ive built a couple briggs 5hp engines but most of my time has been on brigs 12.5 and larger for pulling tractors. i have got my first clone done succesfully and she's a runner. specs...

Anyone got a name for this mini.. Frame is mine, the full bike I found in Unknown members pictures. -thanks

Im having a real tough time getting my clone to run after i did these mods. I dont know whats wrong and would like a pro to do it for me. I would obviously pay whatever it costs to tweek, tune and correct any mistakes. Anyone close to NY? Can i send an engine to NR? If anyone is close you could...

Hello,I live in Orange County Ca.Im looking for someone that will custom build a mini bike frames in the socal area.Im not looking for anything to trick in the design,just a frame/forks that are welded by a pro,use a fat tire and maybe use some good tubing like 4130. So if you know of any...

I bought a HF 6.5 to mod and yesterday I forgot I had a almost new briggs Inteck 190 (5.5) :doah: I've got to much stuff. which motor would be the best to do a mild build on ?? I think I know what you all going to tell me but go and tell me bigger engines (V8-6cyl) are my specialty never...