carb

I've got the reed cage, i just need a carb. prefer a good working but ill take a nasty one to rebuild if the price is good. help a guy out! thanks in advance!!

I picked this up a while back but ended up never getting the Broncco I had been eyeballing I cleaned the paint and grime from the exterior of the carb, and the inside was checked (looks pretty clean). Will probably need a new kit before use, but might be okay ? This can be yours for just...

Hi, lurked here for a bit for valuable info and now looking for some specific help from the insightful members here. I have a Predator 212 that I upgraded with new header/exhaust and intake. I also bought the etube and new jets .36 and .37. It idles well but when I give it gas it kills...

Got this and decided not to use it. Appears to all be there. $300 shipped

Hey, I've been searching and searching for a replacement carb for my HS40 55363D motor and I cannot not find a clear answer on which carb to get. I went to OldMiniBikes warehouse and they said there was an OEM one available but for around $80. Is there a universal knock-off carb I could use? Thanks

Horstman billet intake and 22mm mikuni carb with adjustable main jet and instructions. Came from a member that got it from a member. I never used it. Neither did previous owners. $100 shipped to lower 48

Just ran across this nice motor built by Frank Moore Vintage Go Kart Mini Bike West Bend Power Bee 580 Dual Carburetors | eBay

My daughters db30 started leaking fuel this weekend around the base where the carb and head meet. I took it of and it appears to be coming out of a tiny hole on the carb. Any ideas as why? Thanks in advance

I know this is the what is it section and i kinda already know what these are but not what the lauson carb goes on it looks like it may have been lawnmower? can it be used on a minibike engine? what hp? the zenith i think is off an old clarke forklift we had.

Just this engine last night but Im not familiar with the carb on it. Has no bowl and leaks out of the carb. I want to buy new gaskets for it. Thanks for any help.

started on working on a heathkit hillclimber and got it to run on starting fluid. next step is the carb. I tried to remove the nuts that hold the cab on but the studs are spinning as well. the studs are into an adaptor on the motor any easy way to get them out? also looking a the carb...

Gotta Briggs coming that was built up, its an 80's engine. anyone know if this carb style will still fit the old flat tank bolt pattern and tube holes? I want to use my older shrouding with Aluminum recoil and flat tank for a more period correct appearance.

Not sure who the maker is of this carb, only marking on it is a "C". Measures 19mm. In decent condition. I have not had this on anything. Includes pleated filter. Protective rubber cable boot is torn at the top. Asking $30 plus shipping. PayPal preferred, include the fees or send as a friend.

I have a 5hp flathead and I need a carb and manifold. I have done a ton of looking around here for setups that work and so far I know that I can put on a mikuni 22mm slide carb, a Tecumseh carb, or a Tillotson. It seems to be really difficult to figure out which one specifically will work, like...

This is the first time i've ever actually removed the governor. We've always just held it back with a spring. If i run it up slow it's good but, if i crack the throttle it hesitates & will die if i don't feather it. I have the aftermarket air filter(off for free flow) so it's getting plenty of...

I could use a little information here fellows. I have two 3hp Briggs motors I'm rebuilding and the pulsa-jet carbs. are in pretty rugged shape. However, sitting on the shelf I have two other pulsa-jet carbs. that came off of 5hp Briggs motors and they are in excellent condition. My question...

Front mount 5hp tank, very solid and clean inside $15 plus shipping Rear tank with freshened carb, will need gasket between carb and tank... Tank has a few minor dings but is clean inside.. Choke is tight... $30 plus shipping.

$50 shipped. PayPal only send as a gift or add the 3 percent. Also like cat parts.

So I dug out my Db 30 + 196cc that I hadn't ridden in a year or so, but it had sat out in the weather that whole time. I cleaned the carb as best I could, and put it back together. I could get it to run for a few seconds but it would putter out. Figured just need to adjust the carb, so I found...

new carb. never seen gas. 20mm copy of the briggs raptor PZ22. it will fit tecumseh with minor modifications, the manifold holes need elongated about 1/16" of a inch and possibly make a gasket instead of the supplied Oring...... the choke lever may need bending too. i have had good luck with...